This is the latest recevied telemetry packets stored in our database for station/object IU0VBE-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791092151 | 996 Count | 350 Count | 5 Count | 0 VDC | 0 VDC |
| 1791090348 | 995 Count | 350 Count | 5 Count | 0 VDC | 0 VDC |
| 1791088545 | 994 Count | 350 Count | 5 Count | 0 VDC | 0 VDC |
| 1791086742 | 993 Count | 350 Count | 5 Count | 0 VDC | 0 VDC |
| 1791084939 | 992 Count | 350 Count | 5 Count | 0 VDC | 0 VDC |
| 1791083136 | 991 Count | 350 Count | 5 Count | 0 VDC | 0 VDC |
| 1791081333 | 990 Count | 350 Count | 5 Count | 0 VDC | 0 VDC |
| 1791079530 | 989 Count | 350 Count | 5 Count | 0 VDC | 0 VDC |
| 1791077763 | 988 Count | 350 Count | 5 Count | 0 VDC | 0 VDC |
| 1791075960 | 987 Count | 350 Count | 5 Count | 0 VDC | 0 VDC |
| 1791074157 | 986 Count | 350 Count | 5 Count | 0 VDC | 0 VDC |
| 1791072354 | 985 Count | 350 Count | 5 Count | 0 VDC | 0 VDC |
| 1791070551 | 984 Count | 350 Count | 5 Count | 0 VDC | 0 VDC |
| 1791068748 | 983 Count | 350 Count | 5 Count | 0 VDC | 0 VDC |
| 1791066945 | 982 Count | 350 Count | 5 Count | 0 VDC | 0 VDC |
| 1791065142 | 981 Count | 350 Count | 5 Count | 0 VDC | 0 VDC |
| 1791063339 | 980 Count | 350 Count | 5 Count | 0 VDC | 0 VDC |
| 1791061536 | 979 Count | 350 Count | 5 Count | 0 VDC | 0 VDC |
| 1791059732 | 978 Count | 350 Count | 5 Count | 0 VDC | 0 VDC |
| 1791057929 | 977 Count | 350 Count | 5 Count | 0 VDC | 0 VDC |
| 1791056163 | 976 Count | 350 Count | 5 Count | 0 VDC | 0 VDC |
| 1791054359 | 975 Count | 350 Count | 5 Count | 0 VDC | 0 VDC |
| 1791052556 | 974 Count | 350 Count | 5 Count | 0 VDC | 0 VDC |
| 1791050753 | 973 Count | 350 Count | 5 Count | 0 VDC | 0 VDC |
| 1791048950 | 972 Count | 350 Count | 5 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)