This is the latest recevied telemetry packets stored in our database for station/object DL8GAK-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791039376 | 29.7 C | 39.99 % | 1032 hPa | 0 | 0 |
| 1791039292 | 29.6 C | 40.05 % | 1031.38 hPa | 0 | 0 |
| 1791039268 | 29.6 C | 40.05 % | 1030.63 hPa | 0 | 0 |
| 1791039244 | 29.6 C | 39.95 % | 1030.75 hPa | 0 | 0 |
| 1791039028 | 29.4 C | 40.28 % | 1031.88 hPa | 0 | 0 |
| 1791038999 | 29.4 C | 40.03 % | 1031.88 hPa | 0 | 0 |
| 1791038975 | 29.4 C | 40.03 % | 1031.88 hPa | 0 | 0 |
| 1791038951 | 29.4 C | 40.03 % | 1032.75 hPa | 0 | 0 |
| 1791038908 | 29.3 C | 39.93 % | 1030.75 hPa | 0 | 0 |
| 1791038884 | 29.2 C | 39.99 % | 1029.5 hPa | 0 | 0 |
| 1791038860 | 29.2 C | 39.99 % | 1029.63 hPa | 0 | 0 |
| 1791038833 | 29.2 C | 39.99 % | 1030.63 hPa | 0 | 0 |
| 1791038809 | 29.2 C | 39.96 % | 1028.63 hPa | 0 | 0 |
| 1791038785 | 29.2 C | 39.96 % | 1031.63 hPa | 0 | 0 |
| 1791038761 | 29.1 C | 40.12 % | 1034.75 hPa | 0 | 0 |
| 1791038710 | 29.1 C | 40.12 % | 1031.75 hPa | 0 | 0 |
| 1791038672 | 29.1 C | 39.85 % | 1030.88 hPa | 0 | 0 |
| 1791038648 | 29.1 C | 39.85 % | 1031.5 hPa | 0 | 0 |
| 1791038624 | 29.1 C | 39.78 % | 1033 hPa | 0 | 0 |
| 1791038600 | 29.1 C | 39.78 % | 1031.13 hPa | 0 | 0 |
| 1791038576 | 29 C | 39.46 % | 1028.13 hPa | 0 | 0 |
| 1791038552 | 29 C | 39.46 % | 1030 hPa | 0 | 0 |
| 1791038528 | 29 C | 39.46 % | 1030.63 hPa | 0 | 0 |
| 1791038504 | 29 C | 39.25 % | 1034.25 hPa | 0 | 0 |
| 1791038480 | 29 C | 39.25 % | 1033.25 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)