This is the latest recevied telemetry packets stored in our database for station/object SP2UUU-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1780618134 | 808 Count | 830 Count | 808 Count | 4.2 VDC | 0.18 VDC |
| 1780616334 | 806 Count | 828 Count | 806 Count | 4.2 VDC | 0.18 VDC |
| 1780612733 | 798 Count | 820 Count | 798 Count | 4.18 VDC | 0.18 VDC |
| 1780610933 | 796 Count | 818 Count | 796 Count | 4.18 VDC | 0.18 VDC |
| 1780609133 | 794 Count | 816 Count | 794 Count | 4.19 VDC | 0.18 VDC |
| 1780607335 | 792 Count | 814 Count | 792 Count | 4.19 VDC | 0.18 VDC |
| 1780605535 | 790 Count | 812 Count | 790 Count | 4.19 VDC | 0.18 VDC |
| 1780603734 | 788 Count | 810 Count | 788 Count | 4.18 VDC | 0.18 VDC |
| 1780601934 | 786 Count | 808 Count | 786 Count | 4.19 VDC | 0.18 VDC |
| 1780600134 | 784 Count | 806 Count | 784 Count | 4.19 VDC | 0.18 VDC |
| 1780598334 | 782 Count | 804 Count | 782 Count | 4.17 VDC | 0.18 VDC |
| 1780596534 | 780 Count | 802 Count | 780 Count | 4.19 VDC | 0.18 VDC |
| 1780594733 | 778 Count | 800 Count | 778 Count | 4.2 VDC | 0.18 VDC |
| 1780592938 | 773 Count | 795 Count | 773 Count | 4.2 VDC | 0.18 VDC |
| 1780591133 | 771 Count | 793 Count | 771 Count | 4.19 VDC | 0.18 VDC |
| 1780589333 | 769 Count | 791 Count | 769 Count | 4.21 VDC | 0.18 VDC |
| 1780587533 | 767 Count | 789 Count | 767 Count | 4.19 VDC | 0.18 VDC |
| 1780585734 | 765 Count | 787 Count | 765 Count | 4.19 VDC | 0.18 VDC |
| 1780583934 | 763 Count | 785 Count | 763 Count | 4.18 VDC | 0.14 VDC |
| 1780582133 | 761 Count | 783 Count | 761 Count | 4.17 VDC | 0.18 VDC |
| 1780580333 | 760 Count | 782 Count | 760 Count | 4.2 VDC | 0.18 VDC |
| 1780578533 | 759 Count | 781 Count | 759 Count | 4.2 VDC | 0.18 VDC |
| 1780576732 | 757 Count | 779 Count | 757 Count | 4.2 VDC | 0.18 VDC |
| 1780574932 | 755 Count | 777 Count | 755 Count | 4.19 VDC | 0.18 VDC |
| 1780573132 | 754 Count | 776 Count | 754 Count | 4.19 VDC | 0.16 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)