This is the latest recevied telemetry packets stored in our database for station/object SP2AJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793715487 | 337 Count | 563 Count | 295 Count | 0 VDC | 0 VDC |
| 1793714586 | 334 Count | 560 Count | 293 Count | 0 VDC | 0 VDC |
| 1793713685 | 330 Count | 556 Count | 290 Count | 0 VDC | 0 VDC |
| 1793712785 | 325 Count | 535 Count | 286 Count | 0 VDC | 0 VDC |
| 1793711884 | 307 Count | 507 Count | 269 Count | 0 VDC | 0 VDC |
| 1793710983 | 301 Count | 494 Count | 264 Count | 0 VDC | 0 VDC |
| 1793710082 | 284 Count | 460 Count | 248 Count | 0 VDC | 0 VDC |
| 1793709182 | 271 Count | 425 Count | 236 Count | 0 VDC | 0 VDC |
| 1793708281 | 265 Count | 408 Count | 231 Count | 0 VDC | 0 VDC |
| 1793707380 | 261 Count | 397 Count | 228 Count | 0 VDC | 0 VDC |
| 1793706479 | 256 Count | 391 Count | 224 Count | 0 VDC | 0 VDC |
| 1793705579 | 248 Count | 380 Count | 217 Count | 0 VDC | 0 VDC |
| 1793704678 | 235 Count | 364 Count | 205 Count | 0 VDC | 0 VDC |
| 1793703777 | 229 Count | 356 Count | 200 Count | 0 VDC | 0 VDC |
| 1793702876 | 220 Count | 345 Count | 192 Count | 0 VDC | 0 VDC |
| 1793701976 | 215 Count | 338 Count | 188 Count | 0 VDC | 0 VDC |
| 1793701075 | 210 Count | 331 Count | 184 Count | 0 VDC | 0 VDC |
| 1793700174 | 207 Count | 326 Count | 182 Count | 0 VDC | 0 VDC |
| 1793699273 | 202 Count | 318 Count | 178 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)