This is the latest recevied telemetry packets stored in our database for station/object SOMTNP. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | RX_rate* | RelRate* | DrpRate* |
|---|---|---|---|---|---|
| 1793739944 | 4.2 VDC | 20.76 VDC | 282 pkt/h | 132 pkt/h | 150 pkt/h |
| 1793739345 | 4.2 VDC | 20.7 VDC | 234 pkt/h | 108 pkt/h | 126 pkt/h |
| 1793738745 | 4.21 VDC | 20.48 VDC | 269 pkt/h | 120 pkt/h | 150 pkt/h |
| 1793738144 | 4.21 VDC | 20.52 VDC | 258 pkt/h | 114 pkt/h | 144 pkt/h |
| 1793737544 | 4.21 VDC | 20.64 VDC | 288 pkt/h | 102 pkt/h | 186 pkt/h |
| 1793736944 | 4.21 VDC | 20.78 VDC | 294 pkt/h | 96 pkt/h | 198 pkt/h |
| 1793736344 | 4.21 VDC | 20.64 VDC | 174 pkt/h | 78 pkt/h | 96 pkt/h |
| 1793735743 | 4.21 VDC | 20.5 VDC | 258 pkt/h | 102 pkt/h | 156 pkt/h |
| 1793735144 | 4.21 VDC | 20.56 VDC | 288 pkt/h | 120 pkt/h | 168 pkt/h |
| 1793734544 | 4.21 VDC | 20.44 VDC | 222 pkt/h | 78 pkt/h | 144 pkt/h |
| 1793733944 | 4.21 VDC | 20.28 VDC | 276 pkt/h | 108 pkt/h | 168 pkt/h |
| 1793733344 | 4.21 VDC | 20.44 VDC | 305 pkt/h | 126 pkt/h | 180 pkt/h |
| 1793732744 | 4.21 VDC | 20.46 VDC | 246 pkt/h | 96 pkt/h | 150 pkt/h |
| 1793732143 | 4.21 VDC | 20.44 VDC | 300 pkt/h | 108 pkt/h | 192 pkt/h |
| 1793731543 | 4.21 VDC | 20.52 VDC | 294 pkt/h | 120 pkt/h | 174 pkt/h |
| 1793730943 | 4.21 VDC | 20.5 VDC | 204 pkt/h | 90 pkt/h | 114 pkt/h |
| 1793730343 | 4.22 VDC | 20.48 VDC | 425 pkt/h | 174 pkt/h | 252 pkt/h |
| 1793729743 | 4.22 VDC | 20.52 VDC | 224 pkt/h | 71 pkt/h | 153 pkt/h |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
RX_rate: 0, 1, 0
RelRate: 0, 1, 0
DrpRate: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)