This is the latest recevied telemetry packets stored in our database for station/object KB5TSI-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1769623290 | 461 | 604 | 0 | 0 | 0 |
| 1769623050 | 464 | 602 | 0 | 0 | 0 |
| 1769622931 | 463 | 602 | 0 | 0 | 0 |
| 1769622811 | 462 | 602 | 0 | 0 | 0 |
| 1769622691 | 461 | 602 | 0 | 0 | 0 |
| 1769622572 | 464 | 602 | 0 | 0 | 0 |
| 1769622452 | 463 | 602 | 0 | 0 | 0 |
| 1769622332 | 464 | 602 | 0 | 0 | 0 |
| 1769622213 | 464 | 602 | 0 | 0 | 0 |
| 1769622093 | 466 | 603 | 0 | 0 | 0 |
| 1769621735 | 465 | 604 | 0 | 0 | 0 |
| 1769621614 | 465 | 604 | 0 | 0 | 0 |
| 1769621495 | 468 | 605 | 0 | 0 | 0 |
| 1769621375 | 468 | 605 | 0 | 0 | 0 |
| 1769621255 | 467 | 605 | 0 | 0 | 0 |
| 1769621135 | 470 | 604 | 0 | 0 | 0 |
| 1769620896 | 468 | 602 | 0 | 0 | 0 |
| 1769620776 | 467 | 599 | 0 | 0 | 0 |
| 1769620657 | 470 | 596 | 0 | 0 | 0 |
| 1769620537 | 468 | 594 | 0 | 0 | 0 |
| 1769617590 | 455 | 575 | 0 | 0 | 0 |
| 1769617471 | 467 | 573 | 0 | 0 | 0 |
| 1769617351 | 467 | 570 | 0 | 0 | 0 |
| 1769617231 | 469 | 568 | 0 | 0 | 0 |
| 1769617112 | 467 | 565 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)