APRS Track Direct

My position About ☰

reset

PINAL Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PINAL. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	V_Batt*	V_Ext*	RX_rate*	RelRate*	DrpRate*
1791127657	4.27 VDC	13.12 VDC	738 pkt/h	150 pkt/h	588 pkt/h
1791127057	4.27 VDC	13.12 VDC	678 pkt/h	102 pkt/h	576 pkt/h
1791126456	4.27 VDC	13.12 VDC	690 pkt/h	120 pkt/h	570 pkt/h
1791125856	4.27 VDC	13.12 VDC	672 pkt/h	132 pkt/h	540 pkt/h
1791125256	4.27 VDC	13.12 VDC	600 pkt/h	132 pkt/h	468 pkt/h
1791124656	4.27 VDC	13.12 VDC	804 pkt/h	156 pkt/h	648 pkt/h
1791124056	4.27 VDC	13.12 VDC	822 pkt/h	126 pkt/h	696 pkt/h
1791123462	4.27 VDC	13.12 VDC	858 pkt/h	126 pkt/h	732 pkt/h
1791122855	4.27 VDC	13.1 VDC	942 pkt/h	126 pkt/h	816 pkt/h
1791122255	4.27 VDC	13.1 VDC	942 pkt/h	138 pkt/h	804 pkt/h
1791121655	4.27 VDC	13.1 VDC	726 pkt/h	126 pkt/h	600 pkt/h
1791121055	4.27 VDC	13.1 VDC	912 pkt/h	150 pkt/h	762 pkt/h
1791120454	4.27 VDC	13.1 VDC	966 pkt/h	162 pkt/h	804 pkt/h
1791119854	4.27 VDC	13.1 VDC	804 pkt/h	114 pkt/h	690 pkt/h
1791119257	4.28 VDC	13.12 VDC	837 pkt/h	124 pkt/h	713 pkt/h
1791118643	4.26 VDC	13.08 VDC	0 pkt/h	0 pkt/h	0 pkt/h
1791118060	4.27 VDC	13.1 VDC	810 pkt/h	126 pkt/h	684 pkt/h
1791117460	4.27 VDC	13.1 VDC	948 pkt/h	162 pkt/h	786 pkt/h
1791116860	4.27 VDC	13.1 VDC	840 pkt/h	126 pkt/h	714 pkt/h
1791116260	4.27 VDC	13.1 VDC	948 pkt/h	162 pkt/h	786 pkt/h
1791115659	4.27 VDC	13.1 VDC	690 pkt/h	120 pkt/h	570 pkt/h
1791115059	4.27 VDC	13.1 VDC	846 pkt/h	168 pkt/h	678 pkt/h
1791114459	4.27 VDC	13.1 VDC	600 pkt/h	102 pkt/h	498 pkt/h
1791113859	4.27 VDC	13.1 VDC	774 pkt/h	132 pkt/h	642 pkt/h
1791113259	4.27 VDC	13.1 VDC	690 pkt/h	138 pkt/h	552 pkt/h

*Used Equation Coefficients:

V_Batt: 0, 0.01, 0

V_Ext: 0, 0.02, 0

RX_rate: 0, 1, 0

RelRate: 0, 1, 0

DrpRate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)