This is the latest recevied telemetry packets stored in our database for station/object SP8G. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791092888 | 0 Count | 555 Count | 409 Count | 0.28 VDC | 0.08 VDC |
| 1791092287 | 0 Count | 539 Count | 395 Count | 0.28 VDC | 0.08 VDC |
| 1791091686 | 0 Count | 527 Count | 384 Count | 0.28 VDC | 0.08 VDC |
| 1791091086 | 0 Count | 507 Count | 365 Count | 0.28 VDC | 0.08 VDC |
| 1791090485 | 0 Count | 498 Count | 359 Count | 0.28 VDC | 0.08 VDC |
| 1791089884 | 0 Count | 495 Count | 356 Count | 0.28 VDC | 0.08 VDC |
| 1791089283 | 0 Count | 485 Count | 348 Count | 0.28 VDC | 0.08 VDC |
| 1791088683 | 0 Count | 480 Count | 345 Count | 0.28 VDC | 0.08 VDC |
| 1791088082 | 0 Count | 476 Count | 342 Count | 0.28 VDC | 0.08 VDC |
| 1791087481 | 0 Count | 471 Count | 340 Count | 0.28 VDC | 0.08 VDC |
| 1791086880 | 0 Count | 465 Count | 337 Count | 0.28 VDC | 0.08 VDC |
| 1791086279 | 0 Count | 460 Count | 334 Count | 0.28 VDC | 0.08 VDC |
| 1791085679 | 0 Count | 457 Count | 332 Count | 0.28 VDC | 0.08 VDC |
| 1791085078 | 0 Count | 451 Count | 329 Count | 0.28 VDC | 0.08 VDC |
| 1791084477 | 0 Count | 447 Count | 326 Count | 0.28 VDC | 0.08 VDC |
| 1791083876 | 0 Count | 443 Count | 324 Count | 0.28 VDC | 0.08 VDC |
| 1791083276 | 0 Count | 432 Count | 315 Count | 0.28 VDC | 0.08 VDC |
| 1791082675 | 0 Count | 427 Count | 311 Count | 0.28 VDC | 0.08 VDC |
| 1791082074 | 0 Count | 420 Count | 307 Count | 0.28 VDC | 0.08 VDC |
| 1791081473 | 0 Count | 413 Count | 302 Count | 0.28 VDC | 0.08 VDC |
| 1791080873 | 0 Count | 406 Count | 296 Count | 0.28 VDC | 0.08 VDC |
| 1791080272 | 0 Count | 403 Count | 294 Count | 0.28 VDC | 0.08 VDC |
| 1791079671 | 0 Count | 396 Count | 290 Count | 0.28 VDC | 0.08 VDC |
| 1791079071 | 0 Count | 392 Count | 287 Count | 0.28 VDC | 0.08 VDC |
| 1791078470 | 0 Count | 389 Count | 285 Count | 0.28 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)