This is the latest recevied telemetry packets stored in our database for station/object WA6ODP-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791105973 | 10.26 | 422.85 | 505 | 773 | 0 |
| 1791105098 | 10.26 | 424.6 | 505 | 772 | 0 |
| 1791104174 | 10.23 | 425.48 | 505 | 773 | 0 |
| 1791103299 | 10.23 | 430.76 | 510 | 778 | 0 |
| 1791102373 | 10.2 | 433.39 | 510 | 781 | 0 |
| 1791101499 | 10.26 | 437.79 | 515 | 785 | 0 |
| 1791100574 | 10.23 | 441.31 | 515 | 788 | 0 |
| 1791099700 | 10.2 | 446.58 | 521 | 792 | 0 |
| 1791098773 | 10.2 | 449.22 | 526 | 798 | 0 |
| 1791097901 | 10.23 | 452.73 | 526 | 802 | 0 |
| 1791096974 | 10.23 | 455.37 | 526 | 804 | 0 |
| 1791096102 | 10.2 | 457.13 | 526 | 808 | 0 |
| 1791095173 | 10.2 | 461.52 | 537 | 812 | 0 |
| 1791094303 | 10.23 | 464.16 | 537 | 815 | 0 |
| 1791093374 | 10.26 | 468.55 | 537 | 818 | 0 |
| 1791092506 | 10.26 | 472.07 | 537 | 823 | 0 |
| 1791091574 | 10.2 | 473.83 | 548 | 827 | 0 |
| 1791089776 | 10.26 | 480.86 | 548 | 833 | 0 |
| 1791089267 | 10.23 | 483.5 | 548 | 835 | 0 |
| 1791087976 | 10.23 | 487.01 | 548 | 842 | 0 |
| 1791087466 | 10.2 | 489.65 | 548 | 843 | 0 |
| 1791086176 | 10.2 | 495.8 | 553 | 849 | 0 |
| 1791085669 | 10.23 | 499.32 | 558 | 851 | 0 |
| 1791084376 | 10.26 | 507.23 | 558 | 858 | 0 |
| 1791083868 | 10.2 | 508.99 | 564 | 861 | 0 |
*Used Equation Coefficients:
Value1: 0, 0.0293, 0
Value2: 0, 0.879, -459.67
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)