APRS Track Direct

My position About ☰

reset

SQ9P-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SQ9P-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	current*	t*	Value3*	Value4*	Value5*
1732512150	2.1 mA	10 C	81 %	0.14 V	3.56 V
1732511223	1.44 mA	10 C	82 %	0.14 V	3.58 V
1732510296	1.21 mA	10 C	82 %	0.14 V	3.58 V
1732509369	1.9 mA	10 C	82 %	0.14 V	3.56 V
1732508442	2.17 mA	10 C	81 %	0.14 V	3.55 V
1732507514	2.42 mA	10 C	80 %	0.14 V	3.56 V
1732506587	1.24 mA	10 C	82 %	0.14 V	3.58 V
1732505660	3.62 mA	11 C	80 %	0.14 V	3.53 V
1732504733	1.29 mA	11 C	80 %	0.14 V	3.53 V
1732503806	2.31 mA	11 C	78 %	0.14 V	3.56 V
1732502878	2.78 mA	11 C	79 %	0.14 V	3.56 V
1732501026	3.4 mA	10 C	82 %	0.14 V	3.56 V
1732500096	2.07 mA	10 C	83 %	0.14 V	3.56 V
1732498242	2.84 mA	12 C	75 %	0.14 V	3.56 V
1732497314	2.42 mA	12 C	75 %	0.14 V	3.56 V
1732496386	3.45 mA	11 C	75 %	0.14 V	3.55 V
1732495459	2.07 mA	11 C	78 %	0.14 V	3.58 V
1732494532	3.19 mA	11 C	80 %	0.14 V	3.56 V
1732493605	1.58 mA	11 C	80 %	0.14 V	3.56 V
1732492676	2.15 mA	12 C	78 %	0.14 V	3.56 V
1732491749	1.41 mA	12 C	79 %	0.14 V	3.55 V
1732489894	1.33 mA	10 C	82 %	0.14 V	3.56 V
1732488966	2.07 mA	10 C	83 %	0.14 V	3.56 V
1732488039	1.4 mA	10 C	85 %	0.14 V	3.56 V
1732487112	1.71 mA	10 C	85 %	0.14 V	3.56 V

*Used Equation Coefficients:

current: 0, 0.01569, 0

t: 0, 1, -128

Value3: 0, 1, 0

Value4: 0, 0.02353, 0

Value5: 0, 0.01569, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)