This is the latest recevied telemetry packets stored in our database for station/object DL3ED-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Atm_Press* | Value5* |
|---|---|---|---|---|---|
| 1781699974 | 3.75 | 773 | 4491 | 8180 | 0 |
| 1781699891 | 3.75 | 773 | 4565 | 8169 | 0 |
| 1781699720 | 3.75 | 772 | 4518 | 8221 | 0 |
| 1781699662 | 3.75 | 773 | 4485 | 8203 | 0 |
| 1781699454 | 3.75 | 773 | 4440 | 8180 | 0 |
| 1781699145 | 3.75 | 773 | 4426 | 8196 | 0 |
| 1781698966 | 3.74 | 774 | 4421 | 8197 | 0 |
| 1781698886 | 3.74 | 775 | 4437 | 8192 | 0 |
| 1781698871 | 3.74 | 775 | 4437 | 8164 | 0 |
| 1781698790 | 3.74 | 775 | 4377 | 8177 | 0 |
| 1781698753 | 3.74 | 775 | 4377 | 8156 | 0 |
| 1781698151 | 3.73 | 774 | 4341 | 8188 | 0 |
| 1781697967 | 3.73 | 774 | 4367 | 8138 | 0 |
| 1781697916 | 3.74 | 774 | 4376 | 8133 | 0 |
| 1781697901 | 3.73 | 774 | 4376 | 8146 | 0 |
| 1781697871 | 3.74 | 774 | 4376 | 8138 | 0 |
| 1781697713 | 3.73 | 774 | 4367 | 8133 | 0 |
| 1781697648 | 3.73 | 773 | 4368 | 8133 | 0 |
| 1781697544 | 3.73 | 772 | 4406 | 8161 | 0 |
| 1781697516 | 3.73 | 772 | 4406 | 8183 | 0 |
| 1781697481 | 3.73 | 772 | 4388 | 8176 | 0 |
| 1781697407 | 3.73 | 773 | 4393 | 8186 | 0 |
| 1781697392 | 3.73 | 773 | 4393 | 8186 | 0 |
| 1781697250 | 3.73 | 772 | 4374 | 8187 | 0 |
| 1781697235 | 3.73 | 772 | 4374 | 8187 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 1, 0
Rel_Hum: 0, 1, 0
Atm_Press: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)