This is the latest recevied telemetry packets stored in our database for station/object SP2JAR-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temperatura CPU* | Obciazenie CPU* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791109362 | 2.8 Deg.C | 940 % | 0 | 0 | 0 |
| 1791107560 | 2.7 Deg.C | 899 % | 0 | 0 | 0 |
| 1791105769 | 2.6 Deg.C | 858 % | 0 | 0 | 0 |
| 1791103968 | 2.5 Deg.C | 796 % | 0 | 0 | 0 |
| 1791102167 | 2.4 Deg.C | 756 % | 0 | 0 | 0 |
| 1791100366 | 2.3 Deg.C | 727 % | 0 | 0 | 0 |
| 1791098566 | 2.2 Deg.C | 701 % | 0 | 0 | 0 |
| 1791096765 | 2.1 Deg.C | 672 % | 0 | 0 | 0 |
| 1791094964 | 2 Deg.C | 644 % | 0 | 0 | 0 |
| 1791093163 | 1.9 Deg.C | 611 % | 0 | 0 | 0 |
| 1791091362 | 1.8 Deg.C | 583 % | 0 | 0 | 0 |
| 1791089562 | 1.7 Deg.C | 554 % | 0 | 0 | 0 |
| 1791087761 | 1.6 Deg.C | 521 % | 0 | 0 | 0 |
| 1791085960 | 1.5 Deg.C | 495 % | 0 | 0 | 0 |
| 1791084168 | 1.4 Deg.C | 464 % | 0 | 0 | 0 |
| 1791082367 | 1.3 Deg.C | 432 % | 0 | 0 | 0 |
| 1791080566 | 1.2 Deg.C | 391 % | 0 | 0 | 0 |
| 1791078766 | 1.1 Deg.C | 367 % | 0 | 0 | 0 |
| 1791076965 | 1 Deg.C | 339 % | 0 | 0 | 0 |
| 1791075164 | 0.9 Deg.C | 309 % | 0 | 0 | 0 |
| 1791073363 | 0.8 Deg.C | 281 % | 0 | 0 | 0 |
| 1791071562 | 0.7 Deg.C | 255 % | 0 | 0 | 0 |
| 1791069762 | 0.6 Deg.C | 223 % | 0 | 0 | 0 |
| 1791067961 | 0.5 Deg.C | 194 % | 0 | 0 | 0 |
| 1791066160 | 0.4 Deg.C | 167 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Temperatura CPU: 0, 0.1, 0
Obciazenie CPU: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)