This is the latest recevied telemetry packets stored in our database for station/object SP9CXD-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793712256 | 182 Count | 1001 Count | 56 Count | 3.68 VDC | 0 VDC |
| 1793711655 | 180 Count | 981 Count | 55 Count | 3.68 VDC | 0 VDC |
| 1793711054 | 178 Count | 970 Count | 54 Count | 3.68 VDC | 0 VDC |
| 1793710454 | 177 Count | 962 Count | 54 Count | 3.68 VDC | 0 VDC |
| 1793709853 | 175 Count | 954 Count | 53 Count | 3.69 VDC | 0 VDC |
| 1793709252 | 172 Count | 939 Count | 51 Count | 3.64 VDC | 0 VDC |
| 1793708652 | 171 Count | 932 Count | 51 Count | 3.68 VDC | 0 VDC |
| 1793708051 | 169 Count | 926 Count | 50 Count | 3.67 VDC | 0 VDC |
| 1793707450 | 167 Count | 918 Count | 49 Count | 3.67 VDC | 0 VDC |
| 1793706849 | 166 Count | 908 Count | 49 Count | 3.67 VDC | 0 VDC |
| 1793706249 | 164 Count | 895 Count | 48 Count | 3.67 VDC | 0 VDC |
| 1793705648 | 161 Count | 879 Count | 46 Count | 3.67 VDC | 0 VDC |
| 1793705047 | 159 Count | 872 Count | 45 Count | 3.68 VDC | 0 VDC |
| 1793704447 | 158 Count | 867 Count | 45 Count | 3.68 VDC | 0 VDC |
| 1793703846 | 155 Count | 860 Count | 43 Count | 3.57 VDC | 0 VDC |
| 1793703245 | 154 Count | 851 Count | 43 Count | 3.69 VDC | 0 VDC |
| 1793702644 | 150 Count | 846 Count | 40 Count | 3.7 VDC | 0 VDC |
| 1793702044 | 148 Count | 841 Count | 39 Count | 3.7 VDC | 0 VDC |
| 1793701443 | 146 Count | 834 Count | 38 Count | 3.7 VDC | 0 VDC |
| 1793700842 | 144 Count | 824 Count | 37 Count | 3.65 VDC | 0 VDC |
| 1793700242 | 143 Count | 814 Count | 37 Count | 3.68 VDC | 0 VDC |
| 1793699641 | 141 Count | 804 Count | 36 Count | 3.64 VDC | 0 VDC |
| 1793699040 | 138 Count | 792 Count | 34 Count | 3.67 VDC | 0 VDC |
| 1793698440 | 137 Count | 777 Count | 34 Count | 3.7 VDC | 0 VDC |
| 1793697839 | 135 Count | 754 Count | 33 Count | 3.7 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)