This is the latest recevied telemetry packets stored in our database for station/object WA6ODP-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1769882981 | 11.25 | 69.21 | 0 | 0 | 0 |
| 1769882878 | 11.28 | 68.33 | 0 | 0 | 0 |
| 1769882783 | 11.25 | 68.33 | 0 | 0 | 0 |
| 1769882688 | 11.28 | 68.33 | 0 | 0 | 0 |
| 1769882593 | 11.28 | 68.33 | 0 | 0 | 0 |
| 1769882499 | 11.28 | 68.33 | 0 | 0 | 0 |
| 1769882404 | 11.28 | 67.45 | 0 | 0 | 0 |
| 1769882314 | 11.28 | 67.45 | 0 | 0 | 0 |
| 1769882225 | 11.28 | 67.45 | 0 | 0 | 0 |
| 1769882134 | 11.31 | 67.45 | 0 | 0 | 0 |
| 1769882044 | 11.28 | 67.45 | 0 | 0 | 0 |
| 1769881954 | 11.31 | 67.45 | 0 | 0 | 0 |
| 1769881864 | 11.28 | 67.45 | 0 | 0 | 0 |
| 1769881774 | 11.31 | 67.45 | 0 | 0 | 0 |
| 1769881684 | 11.31 | 66.57 | 0 | 0 | 0 |
| 1769881594 | 11.31 | 66.57 | 0 | 0 | 0 |
| 1769881414 | 11.28 | 69.21 | 0 | 0 | 0 |
| 1769881122 | 11.34 | 66.57 | 0 | 0 | 0 |
| 1769880934 | 11.34 | 65.69 | 0 | 0 | 0 |
| 1769880743 | 11.31 | 66.57 | 0 | 0 | 0 |
| 1769880619 | 11.34 | 64.81 | 0 | 0 | 0 |
| 1769880528 | 11.37 | 64.81 | 0 | 0 | 0 |
| 1769880439 | 11.34 | 64.81 | 0 | 0 | 0 |
| 1769880349 | 11.37 | 64.81 | 0 | 0 | 0 |
| 1769880259 | 11.37 | 64.81 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 0.0293, 0
Value2: 0, 0.88, -459.67
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)