This is the latest recevied telemetry packets stored in our database for station/object SQ2CPA-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765039343 | 128 Count | 239 Count | 117 Count | 3.71 VDC | 0 VDC |
| 1765037547 | 117 Count | 228 Count | 107 Count | 3.72 VDC | 0 VDC |
| 1765035750 | 96 Count | 206 Count | 87 Count | 3.72 VDC | 0 VDC |
| 1765033951 | 87 Count | 191 Count | 79 Count | 3.73 VDC | 0 VDC |
| 1765032152 | 81 Count | 170 Count | 74 Count | 3.73 VDC | 0 VDC |
| 1765030356 | 62 Count | 150 Count | 56 Count | 3.73 VDC | 2.64 VDC |
| 1765028557 | 34 Count | 103 Count | 29 Count | 3.73 VDC | 4.04 VDC |
| 1765026759 | 30 Count | 66 Count | 26 Count | 3.73 VDC | 4.04 VDC |
| 1765023166 | 20 Count | 55 Count | 18 Count | 3.73 VDC | 4.04 VDC |
| 1765021369 | 13 Count | 47 Count | 12 Count | 3.73 VDC | 4.04 VDC |
| 1765019573 | 6 Count | 39 Count | 6 Count | 3.74 VDC | 4.04 VDC |
| 1765017775 | 816 Count | 1010 Count | 719 Count | 3.74 VDC | 4.04 VDC |
| 1765015976 | 808 Count | 994 Count | 712 Count | 3.73 VDC | 4.04 VDC |
| 1765012382 | 761 Count | 941 Count | 667 Count | 3.73 VDC | 4.02 VDC |
| 1765010587 | 754 Count | 932 Count | 661 Count | 3.73 VDC | 4.02 VDC |
| 1765010577 | 749 Count | 932 Count | 661 Count | 3.73 VDC | 4.04 VDC |
| 1765008781 | 742 Count | 924 Count | 655 Count | 3.73 VDC | 4.02 VDC |
| 1765006984 | 734 Count | 914 Count | 648 Count | 3.73 VDC | 4.06 VDC |
| 1765005187 | 727 Count | 906 Count | 642 Count | 3.73 VDC | 1.64 VDC |
| 1765003391 | 720 Count | 897 Count | 636 Count | 3.73 VDC | 0 VDC |
| 1765001594 | 713 Count | 889 Count | 630 Count | 3.73 VDC | 0 VDC |
| 1764999798 | 707 Count | 881 Count | 625 Count | 3.74 VDC | 0 VDC |
| 1764998002 | 699 Count | 873 Count | 618 Count | 3.74 VDC | 0 VDC |
| 1764996205 | 692 Count | 865 Count | 612 Count | 3.74 VDC | 0 VDC |
| 1764994409 | 685 Count | 858 Count | 606 Count | 3.74 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)