This is the latest recevied telemetry packets stored in our database for station/object IU5MGF-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1775251658 | 49 Count | 171 Count | 16 Count | 0 VDC | 0 VDC |
| 1775249854 | 48 Count | 156 Count | 16 Count | 0 VDC | 0 VDC |
| 1775248051 | 47 Count | 141 Count | 16 Count | 0 VDC | 0 VDC |
| 1775246247 | 46 Count | 126 Count | 16 Count | 0 VDC | 0 VDC |
| 1775242640 | 40 Count | 92 Count | 12 Count | 0 VDC | 0 VDC |
| 1775240836 | 37 Count | 79 Count | 10 Count | 0 VDC | 0 VDC |
| 1775239033 | 35 Count | 60 Count | 9 Count | 0 VDC | 0 VDC |
| 1775237229 | 31 Count | 35 Count | 6 Count | 0 VDC | 0 VDC |
| 1775235425 | 26 Count | 9 Count | 2 Count | 0 VDC | 0 VDC |
| 1775235176 | 25 Count | 9 Count | 2 Count | 0 VDC | 0 VDC |
| 1775234774 | 19 Count | 2 Count | 0 Count | 0 VDC | 0 VDC |
| 1775234560 | 18 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775232592 | 17 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775232583 | 18 Count | 38 Count | 1 Count | 0 VDC | 0 VDC |
| 1775230780 | 16 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775230766 | 15 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775230391 | 14 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775230167 | 13 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775230118 | 12 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775229968 | 11 Count | 0 Count | 0 Count | 4.39 VDC | 0.14 VDC |
| 1775229838 | 10 Count | 0 Count | 0 Count | 4.37 VDC | 0.14 VDC |
| 1775229798 | 9 Count | 0 Count | 0 Count | 4.43 VDC | 0.14 VDC |
| 1775229697 | 8 Count | 0 Count | 0 Count | 4.42 VDC | 0.14 VDC |
| 1775229406 | 7 Count | 0 Count | 0 Count | 4.37 VDC | 0.14 VDC |
| 1775229399 | 6 Count | 0 Count | 0 Count | 4.41 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)