This is the latest recevied telemetry packets stored in our database for station/object DD4DV-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1770067255 | 20.3 | 60.34 | 918.5 | 0 | 0 |
| 1770067245 | 20.2 | 60.62 | 918.38 | 0 | 0 |
| 1770067236 | 20.2 | 60.57 | 918.5 | 0 | 0 |
| 1770067179 | 20 | 61.34 | 918.38 | 0 | 0 |
| 1770067171 | 20 | 61.31 | 918.38 | 0 | 0 |
| 1770067161 | 20 | 61.61 | 918.38 | 0 | 0 |
| 1770067152 | 19.9 | 61.87 | 918.38 | 0 | 0 |
| 1770067143 | 19.9 | 61.37 | 918.38 | 0 | 0 |
| 1770067134 | 20 | 61.7 | 918.38 | 0 | 0 |
| 1770067126 | 19.9 | 61.76 | 1004.75 | 0 | 0 |
| 1770065749 | 20.5 | 60.28 | 918.63 | 0 | 0 |
| 1770065596 | 20.7 | 59.25 | 918.75 | 0 | 0 |
| 1770065588 | 21.6 | 56.64 | 918.75 | 0 | 0 |
| 1770063368 | 22.8 | 54.73 | 918.88 | 0 | 0 |
| 1770062730 | 22.9 | 54.53 | 918.88 | 0 | 0 |
| 1770062705 | 23.3 | 54.46 | 918.88 | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)