This is the latest recevied telemetry packets stored in our database for station/object VK3AFQ-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1775236256 | 801 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775234452 | 800 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775232648 | 799 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775230843 | 798 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775229039 | 797 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775227234 | 796 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775225430 | 795 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775223625 | 794 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775221822 | 793 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775220016 | 792 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775218265 | 791 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775216460 | 790 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775214656 | 789 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775212851 | 788 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775211047 | 787 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775209243 | 786 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775207439 | 785 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775205634 | 784 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775203829 | 783 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775202024 | 782 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775200220 | 781 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775198415 | 780 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775196664 | 779 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775194859 | 778 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775193055 | 777 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)