This is the latest recevied telemetry packets stored in our database for station/object OZ5MD-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732504499 | 396 | 597 | 0 | 0 | 0 |
| 1732502908 | 396 | 598 | 0 | 0 | 0 |
| 1732501317 | 396 | 597 | 0 | 0 | 0 |
| 1732499726 | 396 | 597 | 0 | 0 | 0 |
| 1732498135 | 396 | 597 | 0 | 0 | 0 |
| 1732496544 | 397 | 597 | 0 | 0 | 0 |
| 1732494953 | 397 | 597 | 0 | 0 | 0 |
| 1732493362 | 398 | 597 | 0 | 0 | 0 |
| 1732491771 | 398 | 599 | 0 | 0 | 0 |
| 1732490180 | 398 | 597 | 0 | 0 | 0 |
| 1732486998 | 398 | 597 | 0 | 0 | 0 |
| 1732485408 | 399 | 597 | 0 | 0 | 0 |
| 1732482226 | 399 | 597 | 0 | 0 | 0 |
| 1732480635 | 399 | 596 | 0 | 0 | 0 |
| 1732479044 | 400 | 596 | 0 | 0 | 0 |
| 1732477453 | 399 | 595 | 0 | 0 | 0 |
| 1732475863 | 400 | 595 | 0 | 0 | 0 |
| 1732474272 | 401 | 594 | 0 | 0 | 0 |
| 1732469500 | 401 | 593 | 0 | 0 | 0 |
| 1732467909 | 401 | 593 | 0 | 0 | 0 |
| 1732466319 | 403 | 594 | 0 | 0 | 0 |
| 1732464728 | 402 | 594 | 0 | 0 | 0 |
| 1732463137 | 404 | 594 | 0 | 0 | 0 |
| 1732461546 | 403 | 595 | 0 | 0 | 0 |
| 1732459955 | 405 | 596 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)