This is the latest recevied telemetry packets stored in our database for station/object KY1N-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732840659 | 505 Volts | 571 Deg.F | 0 | 0 | 0 |
| 1732839762 | 447 Volts | 571 Deg.F | 0 | 0 | 0 |
| 1732838865 | 506 Volts | 572 Deg.F | 0 | 0 | 0 |
| 1732837967 | 457 Volts | 571 Deg.F | 0 | 0 | 0 |
| 1732837070 | 445 Volts | 572 Deg.F | 0 | 0 | 0 |
| 1732836173 | 504 Volts | 572 Deg.F | 0 | 0 | 0 |
| 1732835276 | 446 Volts | 572 Deg.F | 0 | 0 | 0 |
| 1732834378 | 505 Volts | 573 Deg.F | 0 | 0 | 0 |
| 1732833481 | 443 Volts | 573 Deg.F | 0 | 0 | 0 |
| 1732832584 | 503 Volts | 573 Deg.F | 0 | 0 | 0 |
| 1732831687 | 446 Volts | 572 Deg.F | 0 | 0 | 0 |
| 1732830789 | 507 Volts | 573 Deg.F | 0 | 0 | 0 |
| 1732829892 | 455 Volts | 572 Deg.F | 0 | 0 | 0 |
| 1732828995 | 447 Volts | 574 Deg.F | 0 | 0 | 0 |
| 1732828098 | 461 Volts | 571 Deg.F | 0 | 0 | 0 |
| 1732827201 | 445 Volts | 572 Deg.F | 0 | 0 | 0 |
| 1732826304 | 475 Volts | 571 Deg.F | 0 | 0 | 0 |
| 1732825406 | 445 Volts | 571 Deg.F | 0 | 0 | 0 |
| 1732824509 | 465 Volts | 570 Deg.F | 0 | 0 | 0 |
| 1732823611 | 446 Volts | 571 Deg.F | 0 | 0 | 0 |
| 1732822714 | 457 Volts | 570 Deg.F | 0 | 0 | 0 |
| 1732821817 | 446 Volts | 571 Deg.F | 0 | 0 | 0 |
| 1732820920 | 455 Volts | 570 Deg.F | 0 | 0 | 0 |
| 1732820023 | 447 Volts | 571 Deg.F | 0 | 0 | 0 |
| 1732819126 | 457 Volts | 570 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 1, 0
Temp: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)