This is the latest recevied telemetry packets stored in our database for station/object KL4CF-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732609704 | 461 | 591 | 0 | 0 | 0 |
| 1732609681 | 462 | 590 | 0 | 0 | 0 |
| 1732609550 | 461 | 585 | 0 | 0 | 0 |
| 1732609438 | 461 | 581 | 0 | 0 | 0 |
| 1732609358 | 463 | 579 | 0 | 0 | 0 |
| 1732609239 | 458 | 575 | 0 | 0 | 0 |
| 1732609187 | 458 | 573 | 0 | 0 | 0 |
| 1732609170 | 458 | 572 | 0 | 0 | 0 |
| 1732609163 | 457 | 572 | 0 | 0 | 0 |
| 1732609115 | 459 | 571 | 0 | 0 | 0 |
| 1732575324 | 457 | 620 | 0 | 0 | 0 |
| 1732575303 | 459 | 620 | 0 | 0 | 0 |
| 1732575255 | 459 | 619 | 0 | 0 | 0 |
| 1732575176 | 461 | 619 | 0 | 0 | 0 |
| 1732574823 | 459 | 617 | 0 | 0 | 0 |
| 1732574794 | 458 | 617 | 0 | 0 | 0 |
| 1732574791 | 457 | 616 | 0 | 0 | 0 |
| 1732574467 | 450 | 613 | 0 | 0 | 0 |
| 1732574462 | 446 | 613 | 0 | 0 | 0 |
| 1732574345 | 445 | 612 | 0 | 0 | 0 |
| 1732574323 | 444 | 612 | 0 | 0 | 0 |
| 1732574271 | 439 | 612 | 0 | 0 | 0 |
| 1732574248 | 437 | 611 | 0 | 0 | 0 |
| 1732572501 | 455 | 609 | 0 | 0 | 0 |
| 1732572460 | 451 | 607 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)