This is the latest recevied telemetry packets stored in our database for station/object EA5JKT-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1769627489 | 373 Count | 891 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1769626311 | 372 Count | 891 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1769624507 | 371 Count | 891 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1769622704 | 370 Count | 891 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1769620899 | 369 Count | 891 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1769619096 | 368 Count | 891 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1769617337 | 367 Count | 891 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1769615533 | 366 Count | 891 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1769613730 | 365 Count | 891 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1769611926 | 364 Count | 891 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1769610122 | 363 Count | 891 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1769608318 | 362 Count | 891 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1769606514 | 361 Count | 891 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1769604711 | 360 Count | 891 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1769602907 | 359 Count | 890 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1769601104 | 358 Count | 890 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1769599299 | 357 Count | 889 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1769597496 | 356 Count | 889 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1769595735 | 355 Count | 889 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1769593931 | 354 Count | 889 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1769592128 | 353 Count | 888 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1769590324 | 352 Count | 888 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1769588520 | 351 Count | 887 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1769586717 | 350 Count | 887 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1769584913 | 349 Count | 886 Count | 0 Count | 4.26 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)