This is the latest recevied telemetry packets stored in our database for station/object KF4KUL-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1769631285 | 403 | 635 | 0 | 0 | 0 |
| 1769629490 | 403 | 636 | 0 | 0 | 0 |
| 1769627695 | 402 | 632 | 0 | 0 | 0 |
| 1769625900 | 404 | 630 | 0 | 0 | 0 |
| 1769624105 | 467 | 631 | 0 | 0 | 0 |
| 1769624080 | 465 | 631 | 0 | 0 | 0 |
| 1769624031 | 467 | 631 | 0 | 0 | 0 |
| 1769624026 | 466 | 631 | 0 | 0 | 0 |
| 1769623934 | 467 | 630 | 0 | 0 | 0 |
| 1769623832 | 467 | 629 | 0 | 0 | 0 |
| 1769623745 | 466 | 629 | 0 | 0 | 0 |
| 1769623648 | 467 | 628 | 0 | 0 | 0 |
| 1769623077 | 467 | 631 | 0 | 0 | 0 |
| 1769621462 | 467 | 632 | 0 | 0 | 0 |
| 1769621311 | 469 | 631 | 0 | 0 | 0 |
| 1769621226 | 466 | 631 | 0 | 0 | 0 |
| 1769621083 | 467 | 631 | 0 | 0 | 0 |
| 1769621002 | 466 | 631 | 0 | 0 | 0 |
| 1769620931 | 468 | 631 | 0 | 0 | 0 |
| 1769620614 | 467 | 631 | 0 | 0 | 0 |
| 1769620575 | 466 | 631 | 0 | 0 | 0 |
| 1769620479 | 468 | 631 | 0 | 0 | 0 |
| 1769620355 | 469 | 631 | 0 | 0 | 0 |
| 1769620234 | 466 | 631 | 0 | 0 | 0 |
| 1769620093 | 468 | 631 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)