This is the latest recevied telemetry packets stored in our database for station/object DF1IAN-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Atm_Press* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1785843060 | 33.2 | 1011.75 | 0 | 0 | 0 |
| 1785840431 | 32 | 1018.75 | 0 | 0 | 0 |
| 1785838745 | 31.5 | 1000.63 | 0 | 0 | 0 |
| 1785836761 | 30.8 | 979.75 | 0 | 0 | 0 |
| 1785835397 | 30.4 | 980.5 | 0 | 0 | 0 |
| 1785834049 | 30 | 1020.5 | 0 | 0 | 0 |
| 1785830932 | 29.1 | 1017.88 | 0 | 0 | 0 |
| 1785827501 | 28.2 | 1017.88 | 0 | 0 | 0 |
| 1785824043 | 27.9 | 1018.5 | 0 | 0 | 0 |
| 1785820323 | 28.4 | 1023 | 0 | 0 | 0 |
| 1785818457 | 28.7 | 1020 | 0 | 0 | 0 |
| 1785815809 | 29.2 | 1018 | 0 | 0 | 0 |
| 1785812390 | 29.7 | 1018 | 0 | 0 | 0 |
| 1785805074 | 30.8 | 1017.88 | 0 | 0 | 0 |
| 1785800181 | 31.6 | 1010.88 | 0 | 0 | 0 |
| 1785795151 | 32.7 | 1014.88 | 0 | 0 | 0 |
| 1785791713 | 33.4 | 1013.88 | 0 | 0 | 0 |
| 1785780757 | 35.7 | 1010.38 | 0 | 0 | 0 |
| 1785776554 | 36 | 1014 | 0 | 0 | 0 |
| 1785772724 | 36.5 | 1013.38 | 0 | 0 | 0 |
| 1785769106 | 36.6 | 1016.25 | 0 | 0 | 0 |
| 1785765830 | 36.2 | 1012.38 | 0 | 0 | 0 |
| 1785763142 | 35.6 | 1014.5 | 0 | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Atm_Press: 0, 0.125, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)