This is the latest recevied telemetry packets stored in our database for station/object WA6ODP-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | DC* | PC Board* | CPU* | Ambient* | Value5* |
|---|---|---|---|---|---|
| 1769648829 | 1378 | 83.3 | 46.2 | 62.8 | 0 |
| 1769648193 | 1378 | 83.3 | 47.2 | 62.9 | 0 |
| 1769647630 | 1377 | 83.3 | 47.2 | 63 | 0 |
| 1769646994 | 1380 | 83.4 | 47.2 | 63.2 | 0 |
| 1769646429 | 1377 | 83.4 | 46.7 | 63.2 | 0 |
| 1769645794 | 1377 | 83.3 | 47.2 | 63.3 | 0 |
| 1769645229 | 1377 | 83.4 | 47.2 | 63.3 | 0 |
| 1769644593 | 1377 | 83.3 | 47.2 | 63.3 | 0 |
| 1769644029 | 1377 | 83.3 | 47.2 | 63.3 | 0 |
| 1769643394 | 1371 | 83.3 | 46.7 | 63.3 | 0 |
| 1769642829 | 1377 | 83.4 | 47.2 | 63.2 | 0 |
| 1769642194 | 1377 | 83.3 | 47.2 | 63.2 | 0 |
| 1769641629 | 1375 | 83.3 | 47.2 | 63.3 | 0 |
| 1769640993 | 1377 | 83.3 | 47.2 | 63.3 | 0 |
| 1769640429 | 1377 | 83.4 | 47.2 | 63.4 | 0 |
| 1769639793 | 1377 | 83.3 | 47.2 | 63.6 | 0 |
| 1769639228 | 1377 | 83.1 | 46.2 | 63.6 | 0 |
| 1769638594 | 1377 | 82.8 | 46.7 | 63.5 | 0 |
| 1769638029 | 1377 | 82.6 | 47.2 | 63.4 | 0 |
| 1769637394 | 1375 | 82.5 | 46.7 | 62.9 | 0 |
| 1769636829 | 1375 | 82.5 | 46.7 | 62.7 | 0 |
| 1769636193 | 1377 | 82.5 | 46.2 | 62.6 | 0 |
| 1769635628 | 1377 | 82.3 | 46.2 | 62.6 | 0 |
| 1769634994 | 1375 | 82.2 | 46.2 | 62.5 | 0 |
| 1769634430 | 1377 | 82.2 | 46.2 | 62.4 | 0 |
*Used Equation Coefficients:
DC: 0, 1, 1000
PC Board: 0, 0.1, 0
CPU: 0, 0.1, 0
Ambient: 0, 0.1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)