This is the latest recevied telemetry packets stored in our database for station/object F6HBW-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1780757846 | 34.4 C | 39.04 % | 1017.13 hPa | 0 | 0 |
| 1780756502 | 34.9 C | 38.72 % | 1015.63 hPa | 0 | 0 |
| 1780755647 | 35.5 C | 38.8 % | 1017.88 hPa | 0 | 0 |
| 1780755223 | 35.7 C | 38.69 % | 1013 hPa | 0 | 0 |
| 1780754836 | 35.9 C | 37.42 % | 1015.88 hPa | 0 | 0 |
| 1780748357 | 34.4 C | 47.12 % | 1017 hPa | 0 | 0 |
| 1780748169 | 34.4 C | 47.41 % | 1015.38 hPa | 0 | 0 |
| 1780747933 | 34.1 C | 48.52 % | 1016.38 hPa | 0 | 0 |
| 1780747678 | 33.5 C | 48.98 % | 1015.75 hPa | 0 | 0 |
| 1780747483 | 33.2 C | 49.33 % | 1015.5 hPa | 0 | 0 |
| 1780747163 | 32.4 C | 50.48 % | 1013.75 hPa | 0 | 0 |
| 1780746404 | 31.1 C | 54.11 % | 1014.25 hPa | 0 | 0 |
| 1780746104 | 29.8 C | 57 % | 1013 hPa | 0 | 0 |
| 1780746104 | 29.3 C | 58.44 % | 1014.75 hPa | 0 | 0 |
| 1780746027 | 29.8 C | 57 % | 1013 hPa | 0 | 0 |
| 1780745827 | 29.3 C | 58.44 % | 1014.75 hPa | 0 | 0 |
| 1780745733 | 28.6 C | 61.18 % | 1014.38 hPa | 0 | 0 |
| 1780745407 | 26.6 C | 64.77 % | 1015.25 hPa | 0 | 0 |
| 1780744745 | 19.1 C | 67.47 % | 1014.63 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)