This is the latest recevied telemetry packets stored in our database for station/object IW7BIN-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791116593 | 3.86 VDC | 32.14 VDC | 0 | 0 | 0 |
| 1791115693 | 3.85 VDC | 32.14 VDC | 0 | 0 | 0 |
| 1791114793 | 3.84 VDC | 32.14 VDC | 0 | 0 | 0 |
| 1791113893 | 3.84 VDC | 32.14 VDC | 0 | 0 | 0 |
| 1791112992 | 3.83 VDC | 32.14 VDC | 0 | 0 | 0 |
| 1791112092 | 3.82 VDC | 32.14 VDC | 0 | 0 | 0 |
| 1791111192 | 3.78 VDC | 21.28 VDC | 0 | 0 | 0 |
| 1791110292 | 3.72 VDC | 32.14 VDC | 0 | 0 | 0 |
| 1791109392 | 3.63 VDC | 32.14 VDC | 0 | 0 | 0 |
| 1791108491 | 3.49 VDC | 32.14 VDC | 0 | 0 | 0 |
| 1791107591 | 3.19 VDC | 32.14 VDC | 0 | 0 | 0 |
| 1791106691 | 3.18 VDC | 32.14 VDC | 0 | 0 | 0 |
| 1791105791 | 3.17 VDC | 32.14 VDC | 0 | 0 | 0 |
| 1791104891 | 3.15 VDC | 11.34 VDC | 0 | 0 | 0 |
| 1791103989 | 3.17 VDC | 32.14 VDC | 0 | 0 | 0 |
| 1791103498 | 3.03 VDC | 32.14 VDC | 0 | 0 | 0 |
| 1791102597 | 3.1 VDC | 32.1 VDC | 0 | 0 | 0 |
| 1791101697 | 3.16 VDC | 32.14 VDC | 0 | 0 | 0 |
| 1791100798 | 3.21 VDC | 13.2 VDC | 0 | 0 | 0 |
| 1791099897 | 3.27 VDC | 32.14 VDC | 0 | 0 | 0 |
| 1791098997 | 3.3 VDC | 32.14 VDC | 0 | 0 | 0 |
| 1791098097 | 3.33 VDC | 32.14 VDC | 0 | 0 | 0 |
| 1791096296 | 3.33 VDC | 32.14 VDC | 0 | 0 | 0 |
| 1791095396 | 3.33 VDC | 32.14 VDC | 0 | 0 | 0 |
| 1791094496 | 3.32 VDC | 14.14 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)