This is the latest recevied telemetry packets stored in our database for station/object WA7DEM-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1785838429 | 12.63 Volts | 75.37 Deg.F | 0 | 0 | 0 |
| 1785834844 | 12.66 Volts | 75.37 Deg.F | 0 | 0 | 0 |
| 1785833052 | 12.66 Volts | 76.25 Deg.F | 0 | 0 | 0 |
| 1785831260 | 12.63 Volts | 77.13 Deg.F | 0 | 0 | 0 |
| 1785829468 | 12.63 Volts | 78.01 Deg.F | 0 | 0 | 0 |
| 1785827675 | 12.63 Volts | 78.01 Deg.F | 0 | 0 | 0 |
| 1785825882 | 12.63 Volts | 78.89 Deg.F | 0 | 0 | 0 |
| 1785824090 | 12.63 Volts | 79.77 Deg.F | 0 | 0 | 0 |
| 1785822298 | 12.66 Volts | 80.65 Deg.F | 0 | 0 | 0 |
| 1785820505 | 12.66 Volts | 80.65 Deg.F | 0 | 0 | 0 |
| 1785815126 | 12.72 Volts | 83.29 Deg.F | 0 | 0 | 0 |
| 1785813333 | 12.75 Volts | 85.05 Deg.F | 0 | 0 | 0 |
| 1785809748 | 12.8 Volts | 85.93 Deg.F | 0 | 0 | 0 |
| 1785807954 | 12.83 Volts | 86.81 Deg.F | 0 | 0 | 0 |
| 1785800782 | 12.83 Volts | 90.33 Deg.F | 0 | 0 | 0 |
| 1785798988 | 12.86 Volts | 95.61 Deg.F | 0 | 0 | 0 |
| 1785797193 | 12.86 Volts | 98.25 Deg.F | 0 | 0 | 0 |
| 1785795399 | 12.86 Volts | 98.25 Deg.F | 0 | 0 | 0 |
| 1785791809 | 12.83 Volts | 95.61 Deg.F | 0 | 0 | 0 |
| 1785790015 | 12.83 Volts | 94.73 Deg.F | 0 | 0 | 0 |
| 1785788220 | 12.86 Volts | 92.97 Deg.F | 0 | 0 | 0 |
| 1785786426 | 12.86 Volts | 92.97 Deg.F | 0 | 0 | 0 |
| 1785784632 | 13.07 Volts | 92.09 Deg.F | 0 | 0 | 0 |
| 1785782839 | 13.33 Volts | 90.33 Deg.F | 0 | 0 | 0 |
| 1785781045 | 13.42 Volts | 89.45 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 0.0293, 0
Value2: 0, 0.88, -459.67
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)