This is the latest recevied telemetry packets stored in our database for station/object EA8EE-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TEMP* | HUM* | BAR* | BAT* | SAT* |
|---|---|---|---|---|---|
| 1764954615 | 34.93 °C | 30.9 %RH | 828 hPa | 4 V | 10 |
| 1764954604 | 34.88 °C | 30.7 %RH | 828 hPa | 4 V | 9 |
| 1764954594 | 34.86 °C | 30.9 %RH | 828 hPa | 4 V | 14 |
| 1764954568 | 34.75 °C | 31 %RH | 828 hPa | 4 V | 12 |
| 1764954494 | 34.52 °C | 31.1 %RH | 828 hPa | 3.99 V | 14 |
| 1764954394 | 34.34 °C | 30.8 %RH | 828 hPa | 3.97 V | 15 |
| 1764953814 | 32.2 °C | 33.2 %RH | 828 hPa | 3.87 V | 10 |
| 1764953793 | 32.13 °C | 33.1 %RH | 828 hPa | 3.89 V | 10 |
| 1764953771 | 32.04 °C | 33 %RH | 828 hPa | 3.89 V | 10 |
| 1764953752 | 31.97 °C | 33.1 %RH | 828 hPa | 3.89 V | 10 |
| 1764953717 | 31.86 °C | 33.1 %RH | 828 hPa | 3.88 V | 10 |
| 1764953660 | 31.62 °C | 33.5 %RH | 828 hPa | 3.86 V | 9 |
| 1764953575 | 31.31 °C | 33.7 %RH | 828 hPa | 3.85 V | 9 |
| 1764953513 | 31.13 °C | 33.9 %RH | 828 hPa | 3.84 V | 7 |
| 1764953498 | 31.1 °C | 34 %RH | 828 hPa | 3.83 V | 9 |
| 1764953482 | 31.07 °C | 34 %RH | 828 hPa | 3.83 V | 8 |
| 1764953474 | 31.05 °C | 34.2 %RH | 828 hPa | 3.83 V | 10 |
| 1764953465 | 31.04 °C | 34.2 %RH | 828 hPa | 3.85 V | 0 |
*Used Equation Coefficients:
TEMP: 0, 0.01, 0
HUM: 0, 0.1, 0
BAR: 0, 0.1, 0
BAT: 0, 0.01, 0
SAT: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)