This is the latest recevied telemetry packets stored in our database for station/object EX0QKT-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1780659145 | 389 Count | 5 Count | 5 Count | 0 VDC | 0 VDC |
| 1780657345 | 389 Count | 5 Count | 5 Count | 0 VDC | 0 VDC |
| 1780655545 | 389 Count | 5 Count | 5 Count | 0 VDC | 0 VDC |
| 1780653745 | 389 Count | 5 Count | 5 Count | 0 VDC | 0 VDC |
| 1780651945 | 389 Count | 5 Count | 5 Count | 0 VDC | 0 VDC |
| 1780650145 | 389 Count | 5 Count | 5 Count | 0 VDC | 0 VDC |
| 1780648347 | 389 Count | 5 Count | 5 Count | 0 VDC | 0 VDC |
| 1780646545 | 389 Count | 5 Count | 5 Count | 0 VDC | 0 VDC |
| 1780644745 | 389 Count | 5 Count | 5 Count | 0 VDC | 0 VDC |
| 1780642942 | 389 Count | 5 Count | 5 Count | 0 VDC | 0 VDC |
| 1780641142 | 389 Count | 5 Count | 5 Count | 0 VDC | 0 VDC |
| 1780639342 | 389 Count | 5 Count | 5 Count | 0 VDC | 0 VDC |
| 1780637543 | 389 Count | 5 Count | 5 Count | 0 VDC | 0 VDC |
| 1780635743 | 389 Count | 5 Count | 5 Count | 0 VDC | 0 VDC |
| 1780633943 | 389 Count | 5 Count | 5 Count | 0 VDC | 0 VDC |
| 1780632144 | 389 Count | 5 Count | 5 Count | 0 VDC | 0 VDC |
| 1780630343 | 389 Count | 5 Count | 5 Count | 0 VDC | 0 VDC |
| 1780628543 | 389 Count | 5 Count | 5 Count | 0 VDC | 0 VDC |
| 1780626743 | 389 Count | 5 Count | 5 Count | 0 VDC | 0 VDC |
| 1780624943 | 389 Count | 5 Count | 5 Count | 0 VDC | 0 VDC |
| 1780623143 | 389 Count | 5 Count | 5 Count | 0 VDC | 0 VDC |
| 1780621343 | 389 Count | 5 Count | 5 Count | 0 VDC | 0 VDC |
| 1780619543 | 389 Count | 5 Count | 5 Count | 0 VDC | 0 VDC |
| 1780617743 | 389 Count | 5 Count | 5 Count | 0 VDC | 0 VDC |
| 1780615943 | 389 Count | 5 Count | 5 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)