This is the latest recevied telemetry packets stored in our database for station/object DL6DBZ-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | GAS* | Value5* |
|---|---|---|---|---|---|
| 1791094923 | 16 C | 47.58 % | 1030.25 hPa | 1.04 % | 0 |
| 1791053547 | 23.4 C | 45.68 % | 1028.38 hPa | 81.73 % | 0 |
| 1791052642 | 23.9 C | 45.28 % | 1030.25 hPa | 74.07 % | 0 |
| 1791052325 | 24 C | 45.1 % | 1020.63 hPa | 72.93 % | 0 |
| 1791051420 | 24.5 C | 44.6 % | 1027 hPa | 65.69 % | 0 |
| 1791050515 | 25 C | 44.1 % | 1029.13 hPa | 56.98 % | 0 |
| 1791049610 | 25.7 C | 43.48 % | 1030.38 hPa | 51.2 % | 0 |
| 1791048705 | 26.3 C | 42.93 % | 1029.25 hPa | 40.09 % | 0 |
| 1791047800 | 26.9 C | 42.43 % | 1029.25 hPa | 30.23 % | 0 |
| 1791046896 | 27.6 C | 41.88 % | 1034.63 hPa | 20.28 % | 0 |
| 1791045990 | 28.3 C | 41.36 % | 1027.63 hPa | 13.8 % | 0 |
| 1791045085 | 28.9 C | 40.71 % | 1027.88 hPa | 5.38 % | 0 |
| 1791034226 | 30.5 C | 39.76 % | 1031.25 hPa | 6.07 % | 0 |
| 1791033320 | 29.8 C | 40.01 % | 1032 hPa | 18.92 % | 0 |
| 1791032415 | 28.9 C | 39.96 % | 1033.13 hPa | 28.97 % | 0 |
| 1791031510 | 28.4 C | 39.95 % | 1031.75 hPa | 37.83 % | 0 |
| 1791030606 | 27.8 C | 40.36 % | 1031.13 hPa | 49.49 % | 0 |
| 1791029700 | 27.1 C | 40.59 % | 1032.38 hPa | 55.96 % | 0 |
| 1791027890 | 26 C | 40.99 % | 1033 hPa | 77.27 % | 0 |
| 1791026985 | 25.4 C | 41.15 % | 0 hPa | 0 % | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
GAS: 0, 0.01, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)