This is the latest recevied telemetry packets stored in our database for station/object WA7DEM-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791146840 | 13.51 Volts | 73.61 Deg.F | 0 | 0 | 0 |
| 1791145047 | 13.54 Volts | 71.85 Deg.F | 0 | 0 | 0 |
| 1791143255 | 13.57 Volts | 71.85 Deg.F | 0 | 0 | 0 |
| 1791137877 | 13.71 Volts | 67.45 Deg.F | 0 | 0 | 0 |
| 1791136084 | 13.71 Volts | 66.57 Deg.F | 0 | 0 | 0 |
| 1791128914 | 13.24 Volts | 63.05 Deg.F | 0 | 0 | 0 |
| 1791127122 | 13.07 Volts | 62.17 Deg.F | 0 | 0 | 0 |
| 1791125330 | 13.01 Volts | 62.17 Deg.F | 0 | 0 | 0 |
| 1791123538 | 13.01 Volts | 62.17 Deg.F | 0 | 0 | 0 |
| 1791121746 | 12.98 Volts | 62.17 Deg.F | 0 | 0 | 0 |
| 1791118161 | 13.01 Volts | 62.17 Deg.F | 0 | 0 | 0 |
| 1791116369 | 13.07 Volts | 62.17 Deg.F | 0 | 0 | 0 |
| 1791114577 | 13.04 Volts | 62.17 Deg.F | 0 | 0 | 0 |
| 1791112784 | 13.04 Volts | 62.17 Deg.F | 0 | 0 | 0 |
| 1791109200 | 13.07 Volts | 61.29 Deg.F | 0 | 0 | 0 |
| 1791105616 | 13.07 Volts | 62.17 Deg.F | 0 | 0 | 0 |
| 1791103823 | 13.1 Volts | 63.05 Deg.F | 0 | 0 | 0 |
| 1791098446 | 13.16 Volts | 63.05 Deg.F | 0 | 0 | 0 |
| 1791094861 | 13.21 Volts | 63.93 Deg.F | 0 | 0 | 0 |
| 1791093070 | 13.19 Volts | 64.81 Deg.F | 0 | 0 | 0 |
| 1791091277 | 13.21 Volts | 65.69 Deg.F | 0 | 0 | 0 |
| 1791080523 | 13.33 Volts | 70.09 Deg.F | 0 | 0 | 0 |
| 1791076937 | 13.36 Volts | 71.85 Deg.F | 0 | 0 | 0 |
| 1791075145 | 13.42 Volts | 73.61 Deg.F | 0 | 0 | 0 |
| 1791069765 | 13.45 Volts | 83.29 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 0.0293, 0
Value2: 0, 0.88, -459.67
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)