This is the latest recevied telemetry packets stored in our database for station/object SP9KKK-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793718950 | 33 Count | 109 Count | 33 Count | 3.64 VDC | 0 VDC |
| 1793718049 | 284 Count | 1096 Count | 275 Count | 3.64 VDC | 0 VDC |
| 1793717148 | 257 Count | 1000 Count | 249 Count | 3.64 VDC | 0 VDC |
| 1793716247 | 229 Count | 887 Count | 222 Count | 3.64 VDC | 0 VDC |
| 1793715346 | 187 Count | 752 Count | 181 Count | 3.64 VDC | 0 VDC |
| 1793714446 | 159 Count | 647 Count | 154 Count | 3.64 VDC | 0 VDC |
| 1793713545 | 133 Count | 526 Count | 129 Count | 3.64 VDC | 0 VDC |
| 1793712644 | 108 Count | 433 Count | 105 Count | 3.64 VDC | 0 VDC |
| 1793711743 | 75 Count | 309 Count | 73 Count | 3.64 VDC | 0 VDC |
| 1793710842 | 42 Count | 183 Count | 41 Count | 3.64 VDC | 0 VDC |
| 1793709942 | 22 Count | 97 Count | 22 Count | 3.65 VDC | 0 VDC |
| 1793709041 | 269 Count | 1048 Count | 256 Count | 3.65 VDC | 0 VDC |
| 1793708140 | 245 Count | 944 Count | 233 Count | 3.65 VDC | 0 VDC |
| 1793707239 | 219 Count | 856 Count | 208 Count | 3.65 VDC | 0 VDC |
| 1793706338 | 195 Count | 760 Count | 185 Count | 3.65 VDC | 0 VDC |
| 1793705437 | 173 Count | 662 Count | 164 Count | 3.66 VDC | 0 VDC |
| 1793704537 | 138 Count | 508 Count | 130 Count | 3.64 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)