This is the latest recevied telemetry packets stored in our database for station/object GM0USI-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Ext* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1785851054 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1785850333 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1785849613 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1785848893 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1785848173 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1785847453 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1785846733 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1785846013 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1785845293 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1785844573 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1785843853 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1785843132 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1785842412 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1785841692 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1785840972 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1785840252 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1785839532 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1785838812 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1785838092 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1785837372 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1785836652 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1785835932 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1785835211 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1785834491 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1785833771 | 0.54 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Ext: 0, 0.02, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)