This is the latest recevied telemetry packets stored in our database for station/object IQ5VK-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Ext* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1775218486 | 15.02 VDC | 0 | 0 | 0 | 0 |
| 1775216686 | 14.96 VDC | 0 | 0 | 0 | 0 |
| 1775214886 | 14.98 VDC | 0 | 0 | 0 | 0 |
| 1775213086 | 15.04 VDC | 0 | 0 | 0 | 0 |
| 1775211285 | 15.06 VDC | 0 | 0 | 0 | 0 |
| 1775209485 | 15.06 VDC | 0 | 0 | 0 | 0 |
| 1775207685 | 15.06 VDC | 0 | 0 | 0 | 0 |
| 1775205885 | 15.06 VDC | 0 | 0 | 0 | 0 |
| 1775204084 | 15.06 VDC | 0 | 0 | 0 | 0 |
| 1775202284 | 15.06 VDC | 0 | 0 | 0 | 0 |
| 1775200484 | 14.48 VDC | 0 | 0 | 0 | 0 |
| 1775198683 | 14.16 VDC | 0 | 0 | 0 | 0 |
| 1775196883 | 13.84 VDC | 0 | 0 | 0 | 0 |
| 1775195083 | 12.88 VDC | 0 | 0 | 0 | 0 |
| 1775193283 | 12.68 VDC | 0 | 0 | 0 | 0 |
| 1775191483 | 12.64 VDC | 0 | 0 | 0 | 0 |
| 1775189683 | 12.64 VDC | 0 | 0 | 0 | 0 |
| 1775187883 | 12.88 VDC | 0 | 0 | 0 | 0 |
| 1775186083 | 12.88 VDC | 0 | 0 | 0 | 0 |
| 1775184282 | 12.9 VDC | 0 | 0 | 0 | 0 |
| 1775182482 | 12.94 VDC | 0 | 0 | 0 | 0 |
| 1775180682 | 12.88 VDC | 0 | 0 | 0 | 0 |
| 1775178882 | 12.94 VDC | 0 | 0 | 0 | 0 |
| 1775177083 | 12.9 VDC | 0 | 0 | 0 | 0 |
| 1775175283 | 13.02 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Ext: 0, 0.02, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)