This is the latest recevied telemetry packets stored in our database for station/object WA6MZW-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791115286 | 440 | 635 | 0 | 0 | 0 |
| 1791113493 | 424 | 636 | 0 | 0 | 0 |
| 1791111701 | 427 | 636 | 0 | 0 | 0 |
| 1791109908 | 433 | 637 | 0 | 0 | 0 |
| 1791108115 | 438 | 637 | 0 | 0 | 0 |
| 1791106322 | 439 | 638 | 0 | 0 | 0 |
| 1791104529 | 440 | 639 | 0 | 0 | 0 |
| 1791102736 | 438 | 639 | 0 | 0 | 0 |
| 1791100942 | 438 | 639 | 0 | 0 | 0 |
| 1791099149 | 438 | 640 | 0 | 0 | 0 |
| 1791095563 | 437 | 642 | 0 | 0 | 0 |
| 1791093770 | 433 | 643 | 0 | 0 | 0 |
| 1791091976 | 438 | 643 | 0 | 0 | 0 |
| 1791090183 | 431 | 644 | 0 | 0 | 0 |
| 1791088390 | 415 | 645 | 0 | 0 | 0 |
| 1791086596 | 434 | 646 | 0 | 0 | 0 |
| 1791084802 | 434 | 647 | 0 | 0 | 0 |
| 1791083008 | 413 | 648 | 0 | 0 | 0 |
| 1791081213 | 414 | 649 | 0 | 0 | 0 |
| 1791079421 | 438 | 649 | 0 | 0 | 0 |
| 1791077624 | 434 | 651 | 0 | 0 | 0 |
| 1791075830 | 409 | 651 | 0 | 0 | 0 |
| 1791074035 | 413 | 652 | 0 | 0 | 0 |
| 1791072240 | 419 | 652 | 0 | 0 | 0 |
| 1791070445 | 438 | 653 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)