This is the latest recevied telemetry packets stored in our database for station/object KC2GYU-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1769641364 | 479 | 573 | 0 | 0 | 0 |
| 1769641236 | 472 | 572 | 0 | 0 | 0 |
| 1769641177 | 482 | 572 | 0 | 0 | 0 |
| 1769641134 | 482 | 571 | 0 | 0 | 0 |
| 1769641038 | 478 | 571 | 0 | 0 | 0 |
| 1769640935 | 478 | 571 | 0 | 0 | 0 |
| 1769640877 | 480 | 570 | 0 | 0 | 0 |
| 1769640670 | 482 | 568 | 0 | 0 | 0 |
| 1769640590 | 481 | 568 | 0 | 0 | 0 |
| 1769640508 | 481 | 568 | 0 | 0 | 0 |
| 1769640484 | 478 | 567 | 0 | 0 | 0 |
| 1769640427 | 478 | 566 | 0 | 0 | 0 |
| 1769640347 | 479 | 566 | 0 | 0 | 0 |
| 1769640273 | 473 | 565 | 0 | 0 | 0 |
| 1769640185 | 477 | 565 | 0 | 0 | 0 |
| 1769640128 | 477 | 564 | 0 | 0 | 0 |
| 1769640106 | 475 | 564 | 0 | 0 | 0 |
| 1769640044 | 467 | 563 | 0 | 0 | 0 |
| 1769639974 | 476 | 562 | 0 | 0 | 0 |
| 1769639863 | 477 | 561 | 0 | 0 | 0 |
| 1769639859 | 477 | 561 | 0 | 0 | 0 |
| 1769639831 | 478 | 560 | 0 | 0 | 0 |
| 1769639803 | 477 | 559 | 0 | 0 | 0 |
| 1769639724 | 477 | 557 | 0 | 0 | 0 |
| 1769639719 | 481 | 557 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)