This is the latest recevied telemetry packets stored in our database for station/object KL7YY-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732484632 | 479 | 609 | 0 | 0 | 0 |
| 1732484630 | 473 | 607 | 0 | 0 | 0 |
| 1732484527 | 475 | 615 | 0 | 0 | 0 |
| 1732484503 | 473 | 614 | 0 | 0 | 0 |
| 1732484397 | 479 | 610 | 0 | 0 | 0 |
| 1732484358 | 479 | 609 | 0 | 0 | 0 |
| 1732484331 | 473 | 607 | 0 | 0 | 0 |
| 1732484298 | 478 | 606 | 0 | 0 | 0 |
| 1732482990 | 477 | 610 | 0 | 0 | 0 |
| 1732482970 | 472 | 614 | 0 | 0 | 0 |
| 1732482950 | 477 | 613 | 0 | 0 | 0 |
| 1732482931 | 474 | 613 | 0 | 0 | 0 |
| 1732482877 | 477 | 610 | 0 | 0 | 0 |
| 1732482847 | 474 | 608 | 0 | 0 | 0 |
| 1732482827 | 472 | 607 | 0 | 0 | 0 |
| 1732482413 | 482 | 614 | 0 | 0 | 0 |
| 1732482378 | 479 | 613 | 0 | 0 | 0 |
| 1732482324 | 477 | 611 | 0 | 0 | 0 |
| 1732482304 | 475 | 610 | 0 | 0 | 0 |
| 1732482234 | 471 | 608 | 0 | 0 | 0 |
| 1732482215 | 475 | 607 | 0 | 0 | 0 |
| 1732482182 | 475 | 605 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)