This is the latest recevied telemetry packets stored in our database for station/object S59DEM-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765026813 | 4.23 VDC | 11.22 VDC | 0 | 0 | 0 |
| 1765025912 | 4.23 VDC | 11.66 VDC | 0 | 0 | 0 |
| 1765025012 | 4.23 VDC | 11.48 VDC | 0 | 0 | 0 |
| 1765024111 | 4.23 VDC | 11.82 VDC | 0 | 0 | 0 |
| 1765023211 | 4.23 VDC | 11.2 VDC | 0 | 0 | 0 |
| 1765022311 | 4.23 VDC | 11.52 VDC | 0 | 0 | 0 |
| 1765021410 | 4.22 VDC | 11.54 VDC | 0 | 0 | 0 |
| 1765020510 | 4.23 VDC | 11.38 VDC | 0 | 0 | 0 |
| 1765019610 | 4.22 VDC | 11.32 VDC | 0 | 0 | 0 |
| 1765018709 | 4.23 VDC | 11.48 VDC | 0 | 0 | 0 |
| 1765017823 | 4.23 VDC | 11.26 VDC | 0 | 0 | 0 |
| 1765016923 | 4.23 VDC | 11.48 VDC | 0 | 0 | 0 |
| 1765016022 | 4.23 VDC | 11.3 VDC | 0 | 0 | 0 |
| 1765015122 | 4.22 VDC | 11.34 VDC | 0 | 0 | 0 |
| 1765013321 | 4.23 VDC | 10.72 VDC | 0 | 0 | 0 |
| 1765012421 | 4.22 VDC | 11.24 VDC | 0 | 0 | 0 |
| 1765011520 | 4.22 VDC | 10.7 VDC | 0 | 0 | 0 |
| 1765010620 | 4.23 VDC | 10.1 VDC | 0 | 0 | 0 |
| 1765009720 | 4.23 VDC | 10.12 VDC | 0 | 0 | 0 |
| 1765008820 | 4.23 VDC | 10.14 VDC | 0 | 0 | 0 |
| 1765007920 | 4.23 VDC | 10.2 VDC | 0 | 0 | 0 |
| 1765007019 | 4.23 VDC | 10.14 VDC | 0 | 0 | 0 |
| 1765006119 | 4.22 VDC | 10.06 VDC | 0 | 0 | 0 |
| 1765005219 | 4.23 VDC | 10.14 VDC | 0 | 0 | 0 |
| 1765004319 | 4.22 VDC | 10.08 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)