This is the latest recevied telemetry packets stored in our database for station/object OE3PYC-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1780619266 | 20.8 C | 46.44 % | 1021.25 hPa | 0 | 0 |
| 1780617930 | 20.8 C | 46.27 % | 1019.25 hPa | 0 | 0 |
| 1780611413 | 21.2 C | 46.21 % | 1022.5 hPa | 0 | 0 |
| 1780609119 | 21.2 C | 46.28 % | 1018.88 hPa | 0 | 0 |
| 1780607292 | 21.1 C | 46.7 % | 1017.75 hPa | 0 | 0 |
| 1780602983 | 21.1 C | 47.09 % | 1016.13 hPa | 0 | 0 |
| 1780599749 | 20.9 C | 47.28 % | 1018.5 hPa | 0 | 0 |
| 1780597757 | 20.8 C | 46.86 % | 1014.75 hPa | 0 | 0 |
| 1780596024 | 20.9 C | 46.44 % | 1020.25 hPa | 0 | 0 |
| 1780594537 | 20.9 C | 46.47 % | 1018.75 hPa | 0 | 0 |
| 1780591925 | 21 C | 46.78 % | 1019.38 hPa | 0 | 0 |
| 1780589083 | 20.9 C | 47.05 % | 1018.38 hPa | 0 | 0 |
| 1780588094 | 21 C | 46.83 % | 1021 hPa | 0 | 0 |
| 1780579120 | 20.3 C | 49.59 % | 1013.25 hPa | 0 | 0 |
| 1780577402 | 20.3 C | 53.27 % | 1015.88 hPa | 0 | 0 |
| 1780572209 | 20.3 C | 50.31 % | 1022.13 hPa | 0 | 0 |
| 1780569804 | 20.3 C | 51.01 % | 1017 hPa | 0 | 0 |
| 1780567082 | 20.1 C | 50.74 % | 933.63 hPa | 0 | 0 |
| 1780565652 | 20.6 C | 50.57 % | 1018.25 hPa | 0 | 0 |
| 1780558344 | 20.6 C | 44.18 % | 935.13 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)