This is the latest recevied telemetry packets stored in our database for station/object VK2CPR-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785864811 | 551 Count | 0 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1785862397 | 547 Count | 0 Count | 0 Count | 4.19 VDC | 0.14 VDC |
| 1785861228 | 545 Count | 0 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1785860021 | 543 Count | 0 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1785858815 | 541 Count | 0 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1785857608 | 539 Count | 0 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1785856401 | 537 Count | 0 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1785855195 | 535 Count | 0 Count | 0 Count | 4.18 VDC | 0.14 VDC |
| 1785854029 | 533 Count | 0 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1785852823 | 531 Count | 0 Count | 0 Count | 4.19 VDC | 0.14 VDC |
| 1785851616 | 529 Count | 0 Count | 0 Count | 4.21 VDC | 0.14 VDC |
| 1785850409 | 527 Count | 0 Count | 0 Count | 4.21 VDC | 0.14 VDC |
| 1785849203 | 525 Count | 0 Count | 0 Count | 4.2 VDC | 0.14 VDC |
| 1785847996 | 523 Count | 0 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1785846827 | 521 Count | 0 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1785845620 | 519 Count | 0 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1785844413 | 517 Count | 0 Count | 0 Count | 4.18 VDC | 0.14 VDC |
| 1785843207 | 515 Count | 0 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1785842000 | 513 Count | 0 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1785840793 | 511 Count | 0 Count | 0 Count | 4.2 VDC | 0.14 VDC |
| 1785839628 | 509 Count | 0 Count | 0 Count | 4.19 VDC | 0.14 VDC |
| 1785838421 | 507 Count | 0 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1785837215 | 505 Count | 0 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1785836008 | 503 Count | 0 Count | 0 Count | 4.17 VDC | 0.14 VDC |
| 1785834801 | 501 Count | 0 Count | 0 Count | 4.2 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)