This is the latest recevied telemetry packets stored in our database for station/object N7JVN. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732537442 | 12.48 Volts | 72.73 Deg.F | 0 | 0 | 0 |
| 1732535645 | 13.13 Volts | 73.61 Deg.F | 0 | 0 | 0 |
| 1732533849 | 13.1 Volts | 74.49 Deg.F | 0 | 0 | 0 |
| 1732532052 | 13.13 Volts | 74.49 Deg.F | 0 | 0 | 0 |
| 1732530256 | 13.1 Volts | 74.49 Deg.F | 0 | 0 | 0 |
| 1732528459 | 13.13 Volts | 75.37 Deg.F | 0 | 0 | 0 |
| 1732524866 | 13.1 Volts | 76.25 Deg.F | 0 | 0 | 0 |
| 1732523069 | 13.1 Volts | 76.25 Deg.F | 0 | 0 | 0 |
| 1732521272 | 13.1 Volts | 76.25 Deg.F | 0 | 0 | 0 |
| 1732519476 | 13.13 Volts | 77.13 Deg.F | 0 | 0 | 0 |
| 1732517679 | 13.13 Volts | 77.13 Deg.F | 0 | 0 | 0 |
| 1732515882 | 13.13 Volts | 78.01 Deg.F | 0 | 0 | 0 |
| 1732514085 | 13.1 Volts | 78.01 Deg.F | 0 | 0 | 0 |
| 1732506898 | 13.04 Volts | 78.01 Deg.F | 0 | 0 | 0 |
| 1732505101 | 13.92 Volts | 78.01 Deg.F | 0 | 0 | 0 |
| 1732505064 | 13.95 Volts | 78.01 Deg.F | 0 | 0 | 0 |
| 1732505004 | 13.89 Volts | 78.01 Deg.F | 0 | 0 | 0 |
| 1732505001 | 13.86 Volts | 78.01 Deg.F | 0 | 0 | 0 |
| 1732504962 | 13.89 Volts | 77.13 Deg.F | 0 | 0 | 0 |
| 1732504902 | 13.83 Volts | 77.13 Deg.F | 0 | 0 | 0 |
| 1732504881 | 13.86 Volts | 77.13 Deg.F | 0 | 0 | 0 |
| 1732504872 | 13.86 Volts | 76.25 Deg.F | 0 | 0 | 0 |
| 1732503363 | 12.34 Volts | 78.01 Deg.F | 0 | 0 | 0 |
| 1732501566 | 12.36 Volts | 80.65 Deg.F | 0 | 0 | 0 |
| 1732499769 | 13.07 Volts | 84.17 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.0293, 0
Temp: 0, 0.88, -459.67
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)