This is the latest recevied telemetry packets stored in our database for station/object VK2HFG-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | CPU* | Tx* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1780607874 | 11.8 Volts | 39 DegC | 23 pkts | 0 | 0 |
| 1780604274 | 11.7 Volts | 40 DegC | 16 pkts | 0 | 0 |
| 1780600674 | 11.8 Volts | 40 DegC | 14 pkts | 0 | 0 |
| 1780597074 | 11.8 Volts | 40 DegC | 14 pkts | 0 | 0 |
| 1780593474 | 11.8 Volts | 40 DegC | 12 pkts | 0 | 0 |
| 1780589873 | 11.8 Volts | 41 DegC | 13 pkts | 0 | 0 |
| 1780586273 | 11.8 Volts | 40 DegC | 14 pkts | 0 | 0 |
| 1780582673 | 11.9 Volts | 40 DegC | 14 pkts | 0 | 0 |
| 1780579073 | 11.8 Volts | 39 DegC | 18 pkts | 0 | 0 |
| 1780575473 | 11.9 Volts | 39 DegC | 11 pkts | 0 | 0 |
| 1780571873 | 11.8 Volts | 40 DegC | 10 pkts | 0 | 0 |
| 1780568273 | 11.8 Volts | 40 DegC | 10 pkts | 0 | 0 |
| 1780564673 | 11.9 Volts | 40 DegC | 10 pkts | 0 | 0 |
| 1780561073 | 12 Volts | 41 DegC | 11 pkts | 0 | 0 |
| 1780557473 | 11.8 Volts | 43 DegC | 11 pkts | 0 | 0 |
| 1780553873 | 12 Volts | 45 DegC | 14 pkts | 0 | 0 |
| 1780550274 | 12.2 Volts | 46 DegC | 10 pkts | 0 | 0 |
| 1780546674 | 12.1 Volts | 46 DegC | 9 pkts | 0 | 0 |
| 1780543073 | 12.2 Volts | 45 DegC | 11 pkts | 0 | 0 |
| 1780539474 | 12.3 Volts | 46 DegC | 9 pkts | 0 | 0 |
| 1780535874 | 12.2 Volts | 44 DegC | 10 pkts | 0 | 0 |
| 1780532274 | 12.4 Volts | 42 DegC | 14 pkts | 0 | 0 |
| 1780525073 | 11.7 Volts | 40 DegC | 9 pkts | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.1, 0
CPU: 0, 1, 0
Tx: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)