This is the latest recevied telemetry packets stored in our database for station/object VA3RHH-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732519360 | 397 | 567 | 0 | 0 | 0 |
| 1732517570 | 398 | 567 | 0 | 0 | 0 |
| 1732513991 | 398 | 568 | 0 | 0 | 0 |
| 1732512200 | 397 | 568 | 0 | 0 | 0 |
| 1732510410 | 399 | 569 | 0 | 0 | 0 |
| 1732508620 | 399 | 569 | 0 | 0 | 0 |
| 1732506830 | 399 | 570 | 0 | 0 | 0 |
| 1732503251 | 399 | 571 | 0 | 0 | 0 |
| 1732501461 | 399 | 572 | 0 | 0 | 0 |
| 1732499671 | 400 | 573 | 0 | 0 | 0 |
| 1732497881 | 399 | 574 | 0 | 0 | 0 |
| 1732496090 | 400 | 575 | 0 | 0 | 0 |
| 1732494300 | 398 | 576 | 0 | 0 | 0 |
| 1732492509 | 399 | 578 | 0 | 0 | 0 |
| 1732488928 | 398 | 582 | 0 | 0 | 0 |
| 1732487138 | 395 | 583 | 0 | 0 | 0 |
| 1732485347 | 397 | 584 | 0 | 0 | 0 |
| 1732483557 | 399 | 585 | 0 | 0 | 0 |
| 1732479976 | 399 | 586 | 0 | 0 | 0 |
| 1732478184 | 399 | 586 | 0 | 0 | 0 |
| 1732476394 | 399 | 586 | 0 | 0 | 0 |
| 1732474603 | 398 | 585 | 0 | 0 | 0 |
| 1732472812 | 400 | 584 | 0 | 0 | 0 |
| 1732471022 | 400 | 584 | 0 | 0 | 0 |
| 1732469232 | 401 | 582 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)