This is the latest recevied telemetry packets stored in our database for station/object YO3JAZ-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Ext* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1769650795 | 4.76 VDC | 0 | 0 | 0 | 0 |
| 1769649599 | 4.86 VDC | 0 | 0 | 0 | 0 |
| 1769648398 | 4.94 VDC | 0 | 0 | 0 | 0 |
| 1769647198 | 4.94 VDC | 0 | 0 | 0 | 0 |
| 1769645998 | 4.94 VDC | 0 | 0 | 0 | 0 |
| 1769644798 | 4.94 VDC | 0 | 0 | 0 | 0 |
| 1769643597 | 4.94 VDC | 0 | 0 | 0 | 0 |
| 1769642397 | 4.96 VDC | 0 | 0 | 0 | 0 |
| 1769641197 | 4.94 VDC | 0 | 0 | 0 | 0 |
| 1769639997 | 4.94 VDC | 0 | 0 | 0 | 0 |
| 1769638797 | 4.94 VDC | 0 | 0 | 0 | 0 |
| 1769637596 | 4.92 VDC | 0 | 0 | 0 | 0 |
| 1769636396 | 4.96 VDC | 0 | 0 | 0 | 0 |
| 1769635196 | 4.98 VDC | 0 | 0 | 0 | 0 |
| 1769633995 | 4.9 VDC | 0 | 0 | 0 | 0 |
| 1769632795 | 4.98 VDC | 0 | 0 | 0 | 0 |
| 1769631595 | 4.98 VDC | 0 | 0 | 0 | 0 |
| 1769630395 | 4.96 VDC | 0 | 0 | 0 | 0 |
| 1769629193 | 4.84 VDC | 0 | 0 | 0 | 0 |
| 1769627999 | 4.96 VDC | 0 | 0 | 0 | 0 |
| 1769626799 | 4.98 VDC | 0 | 0 | 0 | 0 |
| 1769625598 | 4.96 VDC | 0 | 0 | 0 | 0 |
| 1769624398 | 4.96 VDC | 0 | 0 | 0 | 0 |
| 1769623198 | 4.96 VDC | 0 | 0 | 0 | 0 |
| 1769621997 | 4.96 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Ext: 0, 0.02, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)