This is the latest recevied telemetry packets stored in our database for station/object VE6MVM-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732539549 | 481 | 629 | 0 | 0 | 0 |
| 1732539538 | 481 | 628 | 0 | 0 | 0 |
| 1732539505 | 476 | 627 | 0 | 0 | 0 |
| 1732539490 | 479 | 627 | 0 | 0 | 0 |
| 1732539471 | 480 | 626 | 0 | 0 | 0 |
| 1732539336 | 481 | 626 | 0 | 0 | 0 |
| 1732539154 | 480 | 626 | 0 | 0 | 0 |
| 1732538876 | 479 | 626 | 0 | 0 | 0 |
| 1732538789 | 479 | 625 | 0 | 0 | 0 |
| 1732538752 | 478 | 625 | 0 | 0 | 0 |
| 1732538570 | 477 | 624 | 0 | 0 | 0 |
| 1732538480 | 480 | 623 | 0 | 0 | 0 |
| 1732538302 | 480 | 621 | 0 | 0 | 0 |
| 1732538139 | 479 | 618 | 0 | 0 | 0 |
| 1732538086 | 479 | 617 | 0 | 0 | 0 |
| 1732537997 | 479 | 615 | 0 | 0 | 0 |
| 1732537907 | 476 | 613 | 0 | 0 | 0 |
| 1732537752 | 481 | 608 | 0 | 0 | 0 |
| 1732537738 | 479 | 607 | 0 | 0 | 0 |
| 1732537494 | 479 | 596 | 0 | 0 | 0 |
| 1732537332 | 478 | 589 | 0 | 0 | 0 |
| 1732537218 | 478 | 586 | 0 | 0 | 0 |
| 1732537186 | 478 | 584 | 0 | 0 | 0 |
| 1732537115 | 481 | 582 | 0 | 0 | 0 |
| 1732537080 | 480 | 580 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)