This is the latest recevied telemetry packets stored in our database for station/object DO7SRB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785823253 | 305 Count | 304 Count | 279 Count | 4.47 VDC | 0.14 VDC |
| 1785821448 | 285 Count | 270 Count | 263 Count | 4.4 VDC | 0.14 VDC |
| 1785819643 | 269 Count | 255 Count | 248 Count | 4.45 VDC | 0.14 VDC |
| 1785817838 | 261 Count | 248 Count | 241 Count | 4.5 VDC | 0.14 VDC |
| 1785816094 | 253 Count | 240 Count | 234 Count | 4.43 VDC | 0.14 VDC |
| 1785814289 | 247 Count | 235 Count | 229 Count | 4.46 VDC | 0.14 VDC |
| 1785812483 | 237 Count | 226 Count | 220 Count | 4.4 VDC | 0.14 VDC |
| 1785810678 | 223 Count | 213 Count | 207 Count | 4.41 VDC | 0.14 VDC |
| 1785808873 | 213 Count | 203 Count | 198 Count | 4.42 VDC | 0.14 VDC |
| 1785807068 | 200 Count | 191 Count | 186 Count | 4.49 VDC | 0.14 VDC |
| 1785805262 | 186 Count | 177 Count | 173 Count | 4.47 VDC | 0.14 VDC |
| 1785803457 | 177 Count | 168 Count | 165 Count | 4.39 VDC | 0.14 VDC |
| 1785801652 | 164 Count | 156 Count | 153 Count | 4.5 VDC | 0.14 VDC |
| 1785799847 | 149 Count | 141 Count | 139 Count | 4.48 VDC | 0.14 VDC |
| 1785798042 | 137 Count | 130 Count | 128 Count | 4.53 VDC | 0.14 VDC |
| 1785796236 | 127 Count | 121 Count | 119 Count | 4.46 VDC | 0.14 VDC |
| 1785789086 | 69 Count | 65 Count | 65 Count | 4.52 VDC | 0.14 VDC |
| 1785776450 | 934 Count | 978 Count | 875 Count | 4.51 VDC | 0.14 VDC |
| 1785772903 | 911 Count | 956 Count | 854 Count | 4.5 VDC | 0.14 VDC |
| 1785751294 | 727 Count | 773 Count | 682 Count | 4.4 VDC | 0.14 VDC |
| 1785749489 | 714 Count | 761 Count | 670 Count | 4.44 VDC | 0.14 VDC |
| 1785747684 | 700 Count | 748 Count | 657 Count | 4.47 VDC | 0.14 VDC |
| 1785745879 | 689 Count | 737 Count | 647 Count | 4.45 VDC | 0.14 VDC |
| 1785744073 | 676 Count | 725 Count | 635 Count | 4.48 VDC | 0.14 VDC |
| 1785742268 | 668 Count | 717 Count | 628 Count | 4.53 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)