This is the latest recevied telemetry packets stored in our database for station/object SQ8MAE-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791128937 | 344 Count | 942 Count | 260 Count | 4.13 VDC | 0.14 VDC |
| 1791128331 | 333 Count | 922 Count | 251 Count | 4.13 VDC | 0.14 VDC |
| 1791127725 | 325 Count | 912 Count | 245 Count | 4.13 VDC | 0.14 VDC |
| 1791127120 | 317 Count | 898 Count | 239 Count | 4.13 VDC | 0.14 VDC |
| 1791126514 | 308 Count | 888 Count | 232 Count | 4.13 VDC | 0.14 VDC |
| 1791125908 | 300 Count | 873 Count | 226 Count | 4.13 VDC | 0.14 VDC |
| 1791125302 | 292 Count | 861 Count | 220 Count | 4.13 VDC | 0.14 VDC |
| 1791124696 | 284 Count | 848 Count | 214 Count | 4.13 VDC | 0.14 VDC |
| 1791124091 | 276 Count | 830 Count | 208 Count | 4.13 VDC | 0.14 VDC |
| 1791122879 | 255 Count | 793 Count | 191 Count | 4.13 VDC | 0.14 VDC |
| 1791122273 | 244 Count | 778 Count | 182 Count | 4.13 VDC | 0.14 VDC |
| 1791121667 | 233 Count | 763 Count | 173 Count | 4.13 VDC | 0.14 VDC |
| 1791121062 | 228 Count | 749 Count | 170 Count | 4.13 VDC | 0.14 VDC |
| 1791120456 | 219 Count | 735 Count | 163 Count | 4.13 VDC | 0.14 VDC |
| 1791119850 | 210 Count | 720 Count | 156 Count | 4.13 VDC | 0.14 VDC |
| 1791119244 | 202 Count | 710 Count | 150 Count | 4.12 VDC | 0.14 VDC |
| 1791118638 | 186 Count | 691 Count | 136 Count | 4.13 VDC | 0.14 VDC |
| 1791118033 | 170 Count | 671 Count | 122 Count | 4.13 VDC | 0.14 VDC |
| 1791117427 | 156 Count | 648 Count | 110 Count | 4.13 VDC | 0.14 VDC |
| 1791116821 | 145 Count | 637 Count | 101 Count | 4.13 VDC | 0.14 VDC |
| 1791116215 | 139 Count | 628 Count | 97 Count | 4.13 VDC | 0.14 VDC |
| 1791115609 | 133 Count | 619 Count | 93 Count | 4.13 VDC | 0.14 VDC |
| 1791115004 | 128 Count | 607 Count | 90 Count | 4.13 VDC | 0.14 VDC |
| 1791114398 | 124 Count | 591 Count | 88 Count | 4.13 VDC | 0.14 VDC |
| 1791113792 | 115 Count | 577 Count | 81 Count | 4.13 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)