This is the latest recevied telemetry packets stored in our database for station/object DO6KP-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1740056891 | 4.35 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1740055091 | 4.31 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1740053291 | 4.24 VDC | 0.92 VDC | 0 | 0 | 0 |
| 1740051491 | 4.35 VDC | 0.86 VDC | 0 | 0 | 0 |
| 1740049691 | 4.27 VDC | 0.9 VDC | 0 | 0 | 0 |
| 1740047890 | 4.33 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1740046090 | 4.26 VDC | 0.98 VDC | 0 | 0 | 0 |
| 1740044290 | 4.32 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1740042490 | 4.33 VDC | 1 VDC | 0 | 0 | 0 |
| 1740040690 | 4.3 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1740038890 | 4.27 VDC | 1 VDC | 0 | 0 | 0 |
| 1740037090 | 4.3 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1740035290 | 4.31 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1740033490 | 4.25 VDC | 0.98 VDC | 0 | 0 | 0 |
| 1740031690 | 4.35 VDC | 1 VDC | 0 | 0 | 0 |
| 1740029889 | 4.25 VDC | 0.98 VDC | 0 | 0 | 0 |
| 1740028089 | 4.28 VDC | 0.94 VDC | 0 | 0 | 0 |
| 1740026289 | 4.28 VDC | 1 VDC | 0 | 0 | 0 |
| 1740024489 | 4.33 VDC | 0.98 VDC | 0 | 0 | 0 |
| 1740022689 | 4.27 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1740020889 | 4.26 VDC | 0.98 VDC | 0 | 0 | 0 |
| 1740019089 | 4.35 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1740017289 | 4.34 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1740015488 | 4.3 VDC | 0.98 VDC | 0 | 0 | 0 |
| 1740013688 | 4.31 VDC | 0.98 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)