This is the latest recevied telemetry packets stored in our database for station/object HB9KBJ-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | TempIn* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732527127 | 11.49 Volts | 7.42 Deg.C | 0 | 0 | 0 |
| 1732525330 | 11.49 Volts | 4.98 Deg.C | 0 | 0 | 0 |
| 1732523534 | 11.49 Volts | 4 Deg.C | 0 | 0 | 0 |
| 1732521738 | 11.49 Volts | 3.51 Deg.C | 0 | 0 | 0 |
| 1732519941 | 11.49 Volts | 4 Deg.C | 0 | 0 | 0 |
| 1732518146 | 11.49 Volts | 3.51 Deg.C | 0 | 0 | 0 |
| 1732516348 | 11.49 Volts | 3.51 Deg.C | 0 | 0 | 0 |
| 1732512754 | 11.51 Volts | 3.51 Deg.C | 0 | 0 | 0 |
| 1732505566 | 11.51 Volts | 4 Deg.C | 0 | 0 | 0 |
| 1732503770 | 11.51 Volts | 4.49 Deg.C | 0 | 0 | 0 |
| 1732501973 | 11.51 Volts | 4.49 Deg.C | 0 | 0 | 0 |
| 1732500177 | 11.54 Volts | 4.49 Deg.C | 0 | 0 | 0 |
| 1732496584 | 11.54 Volts | 5.47 Deg.C | 0 | 0 | 0 |
| 1732492991 | 11.54 Volts | 6.93 Deg.C | 0 | 0 | 0 |
| 1732491195 | 11.54 Volts | 7.91 Deg.C | 0 | 0 | 0 |
| 1732489673 | 13.54 Volts | 5.47 Deg.C | 0 | 0 | 0 |
| 1732489399 | 13.95 Volts | 7.42 Deg.C | 0 | 0 | 0 |
| 1732489307 | 13.92 Volts | 6.44 Deg.C | 0 | 0 | 0 |
| 1732489181 | 13.54 Volts | 5.47 Deg.C | 0 | 0 | 0 |
| 1732488285 | 11.51 Volts | 5.47 Deg.C | 0 | 0 | 0 |
| 1732486489 | 11.54 Volts | 5.47 Deg.C | 0 | 0 | 0 |
| 1732482897 | 11.54 Volts | 6.44 Deg.C | 0 | 0 | 0 |
| 1732481092 | 14.12 Volts | 5.95 Deg.C | 0 | 0 | 0 |
| 1732481068 | 13.98 Volts | 5.95 Deg.C | 0 | 0 | 0 |
| 1732480927 | 13.95 Volts | 5.47 Deg.C | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.0293, 0
TempIn: 0, 0.4888, -273.15
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)